Our Aquarite SWCG was started yesterday. I have a couple questions - I did search past posts but wasn't able to find the info I am exactly looking for.
  1. Pool builder put the salt in the pool yesterday morning and scrubbed the pool. Not all of it dissolved - DH said the bottom looked like a salt beach! I scrubbed it for about 20 minutes when I got home from school last night, but I don't think it all got dissolved. The water is pretty cloudy now - I am assuming because of the undissolved salt - the pump has been running constantly since they added it yesterday. I was thinking about running the Navigator to suck it into the filter and let it dissolve there - but will it plug it up?
  2. The pool builder added CYA last Friday - I will be testing it tonight to see where it is at, but the warranty guidelines is a CYA of 60-80 with chlorine between 1ppm-3ppm. This chlorine level is really low as compared to the best guess chart - I was going to run the chlorine between 5ppm-8ppm and then let my sample I have to take to the pool store sit in the sun to get the chlorine level to what the warranty guidelines are - my question is what chlorine level should I follow - the literature or the best guess? What is everyone else doing?

This morning my test results were FC-4, CC-0, PH-7.8 (added acid). Monday tests ALK-80 & CH-190.