sounds reasonable assuming the quote for my setup was reasonable. about 1400 u.s and for that , my master grade electrical contractor did the following:

moved 3 breakers from sub panel to main panel.
installed a 15 amp 240 volt gfci breaker on main panel.
rewired to pool pump, heater and generator from 110 to 220 volts.
installed to main bonding point connectors from the above equipment.
connected all 3 items to electrical service.
cleaned up 3 bare wiring points.
installed a switch for each of the 3 electrical items, added an electrical outlet.
added a relay box in my shed with 3 relays including a timer relay to turn off heater before the pool pump and generator (he built the box from scratch with components)
rewire and relocate my timer to be master to the slave relay box.

i thought this was pricey for basically 5 hours work..but i don't have a clue on the parts cost..and i did have to get an inspector to come in..around here they are very pricey and i assume are worked into the labour cost (we have one that covers 2 cities 180 miles apart and all points in between so they are in great demand) so, maybe it isn't as pricey as i thought..the guy did come with great references from people i know.