Huge Hole In Bottom Of Liner Pool

[waste]

Matt, I think the brand you're looking for is Boxer (someone sang it's praises here earlier this year, so a search should find it).
bkny, cut 2 patches for the hole 1 ~ .5" larger diameter than the hole and the other ~ 1" larger diameter, glue the heck out of the small one and apply it (I use a wallpaper seam roller to insure a good bond) then glue and apply the larger patch. Oh yeah, make the patches 'rounded' to reduce the chance of them snagging saomething (ie, the vac) and comming off

[matt4x4]

That's it! BOXER glue, we can't get it up here, so I can't for the life of me remeber the name
I would also check for what kind of gap is behind the hole - may need a plug before patching otherwise it may bust again.

[tenax]

That's it! BOXER glue, we can't get it up here, so I can't for the life of me remeber the name
I would also check for what kind of gap is behind the hole - may need a plug before patching otherwise it may bust again.

i checked into availability of this before in canada and can't recall for certain whether the company that makes ( emailed them) provided me with a canadian distributor or a list of online companies that sell it to canadians...pretty sure it was the latter and i found it readily available by contacting places like intheswim.com. (they are my "canadian tire" if you know what i mean..i have bought way more stuff from them than i ever intended to, but the price and service has been so good!)

keep in mind that just because they may not show a product on their site never means they can't get it for you.

i had a 4 inch cut thanks to my daughter's nimrod buddy who put the steps in without the pads..i was able to work with a conventional tube of swimming pool glue and it worked out great.

[bkny1055]

Thanks matt4x4, doggie and waste on my way to the local Pinch - A - Penny to pick up a Patch Kit with Boxer Adhesive # 100 7bucks not bad will keep you all posted thanks again

[doggie]

Good luck!

[Poconos]

This thread may be helpful, specifically my post #9 Patching Procedure. May give you some ideas. Please keep us posted. Can't offer anything more than what's been said already in this thread.
Al

http://www.poolforum.com/pf2/showthread.php?p=238

[bkny1055]

well it seems to have been resolved
I cut a patch in a circle, put lots of glue on it,jumped in the pool and smacked that patch on the hole

I has been holding strong since i am happy
I was thinking that i was going to have to empty the pool to get to it but all good now thanks to you guys

[doggie]

well it seems to have been resolved
I cut a patch in a circle, put lots of glue on it,jumped in the pool and smacked that patch on the hole

I has been holding strong since i am happy
I was thinking that i was going to have to empty the pool to get to it but all good now thanks to you guys

Good to hear you fixed it!