Re: Aquabot getting tangled?
I've had the machine (T-4) crawl over the cord when the cord is over the edge of the pool (where it enters). I run the cord out over the diving board so it enters the water away from the edge.
Since you've had the machine for a while I'm sure you do the standard.- Turn Handle (reverse) every time you run it
- Only put enough cord in the pool to go to the furtherest point,
- Untwist the cord when putting it in the pool
- Burp the machine when putting it in pool.
- Check weights or floats so it is not climbing too high on the wall
I had trouble with a Dolphin when the wires got twisted inside the floating jacket --- took a replacement cord to fix it. --- Sold it on Ebay.
Hope this helps.
27038 Gallon InGround, Vinyl, DE filter.
Bookmarks