+ Reply to Thread
Results 1 to 10 of 41

Thread: Where to start?

Hybrid View

  1. #1
    Join Date
    Jun 2006
    Location
    Northern Kentucky
    Posts
    174

    Default Re: Where to start?

    yes, you may use 2 or 3 parts distilled to one part pool, and multiply your result by 3 or 4, accordingly. You lose some accuracy, but it will get you closer than "well, it looks dark brown"!

    This is affectionatly known on this forum as "CarlD's shot glass method"
    ~Grace

    Avid reader of this forum
    but alas, no pool... yet!

  2. #2
    Join Date
    May 2006
    Location
    Orland Park, Il (near Chicago)
    Posts
    29

    Default Re: Where to start?

    Just curious if you can accomplish the shot gun method by reducing the number of test drops required i.e. for FC my test kit tells me to add 5 drops. What if I only add 1 or 2 drops and multiply accordingly? If this method works it eliminates a step (adding distilled water) and saves on testing liquids.

  3. #3
    Steve #1 is offline ** No working email address ** Steve #1 0
    Join Date
    Aug 2006
    Posts
    39

    Default Re: Where to start?

    Well, knarf, sounded like a good enough idea to me so I gave it a shot to see what happened. Used 1 drop instead of 5 and it was darker than 5 which would put me at 25 so I'm probably at about 30....... or this method doesn't work.

  4. #4
    keithw is offline Registered+ Thread Analyst keithw 0
    Join Date
    May 2006
    Posts
    64

    Default Re: Where to start?

    Doesn't work. You have to dilute the water with distilled water. But loses accuracy. Better to get a DPD-FAS test kit that test higher than 5PPM.

  5. #5
    Steve #1 is offline ** No working email address ** Steve #1 0
    Join Date
    Aug 2006
    Posts
    39

    Default Re: Where to start?

    Thanks for the buzz kill keithw.

    It appears that the high CYA is the root of my problem and from what I understand, the only way to lower it is to replace the water. With the level of CYA, about how much water am I looking at replacing to get to a more manageable level? I'm guessing this would also help the Harness level?

    With this in mind, anyone know the effects of pool water on grass? We're under mandatory water rationing here and it's a $1500 fine if you water your yard any time other than your 12 hours a week you are allowed however usage for pool maintenance is allowed. I could kill two birds with one stone if it wouldn't have ill effects on my sun baked grass.

    ...... and thanks for all the help so far.

  6. #6
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: Where to start?

    Where do you live? Is there a concern with the water table in your area? Given the drought conditions I'd doubt it but it's something to think about so your pool does not heave when empty. Mine sat empty for 3 months here in Az and not even a crack ... If your water is not real salty it may not be a problem on the grass. What kind of grass?


    Sounds like the water has been in the pool for a long time.. A drain and refill never hurts in that situation.
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  7. #7
    Steve #1 is offline ** No working email address ** Steve #1 0
    Join Date
    Aug 2006
    Posts
    39

    Default Re: Where to start?

    I'm in north Texas (Dallas). The only concern with the water table is the lack of one. How do I know if the water is salty? The grass is St Augustine so it is pretty sturdy except that it is dry now.

+ Reply to Thread

Similar Threads

  1. Day 1, where to start?
    By sturev in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 06-05-2010, 04:34 PM
  2. Sand filter changed @ start of season ? HIGH PRESSURE @24 PSI FROM START
    By timmygreene in forum Pool Equipment & Operations
    Replies: 8
    Last Post: 05-21-2010, 06:48 AM
  3. Where do I start first?
    By jen in tx2 in forum Dealing with Algae & Slime
    Replies: 10
    Last Post: 09-10-2009, 10:54 PM
  4. Help - where to start?
    By kevinm in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 10-01-2006, 06:05 PM
  5. My Start-up. What do you think?
    By Allora in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 05-31-2006, 07:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts