Losing Water!

[scooter hotrod]

I haven't been able to detect any leaks, but I filled the pool up to normal, just below the top of the skimmer and within 2 days it had dropped almost 2 inches. I don't see any standing water around the pool and can't determine what the heck is happening. It's an AG 18X33 ft oval pool with a liner. The pump is brand new and there are no leaks around the filer. Is there anyway to test for a leak in the liner? ANY advice would be greatly appreciated.

THANKS!!!

[matt4x4]

I don't think you'll be looking for standing water, however, spongy ground is something you may be able to detect.
If you have ground cover or gravel around the perimeter, move it aside every couple of feet and poke your finger at the ground.
Another method is from inside the pool, walk around inside and poke your toe down every foot or two, the liner should have some give where the earth is saturated beneath it and the rest of it should be relatively hard in comparison.
This should narrow it down significantly for you.

[scooter hotrod]

Thanks! I'm assuming that it is a leak in the liner and if so, will I have to drain the entire pool in order to fix. Or is there a product that will do it with the water still in. Probably a stupid question, but I thought I'd ask.

[matt4x4]

Since there are no leaks in your equipment, it can only be one of two things, either someone is stealing your water while you sleep, or your liner has a leak
No, you do NOT need to drain the pool EVER! All vinyl pool repair kits come with an underwater glue, there are many glues you can use, the ones supplied aren't necessarily the best, but will do the trick. Just follow the instructions, and buy the best kit you can get your hands on.

[Poconos]

-- Question...without knowing what valving you have is there any water coming out the waste (backwash) line if you have one, with the pump running? If so, probably a bad valve or valve gasket. Some people don't notice this leak source if the waste line dumps into a drain or something.
-- Suggestion...Let it continue to drop and see if it keeps going below the skimmer.
-- Suggestion...plug the return(s) and maybe the skimmer and see what happens.

-- Info...some adhesives can drive you nuts when trying to place a patch because they aggressively attack the vinyl patch and curl it before you can place it in position. Boxer adhesives #100, available at most pool stores, is a slow acting and therefore slow curing adhesive that will not curl the patch quickly.

Hope this helps.
Al

[scooter hotrod]

I don't think there are any water thieves on the loose, so I'm assuming its the liner. I have a push/pull valve and there is no water leaking out of the backwash hose when the pump is running, or when it is not running. It must be the liner.....but wouldn't there be tiny bubbles coming up if this is the case. I mean, I'm losing around 2" of water/day or so.

Thanks for the advice....looks like I have some diving to do this evening. I only have a month of swimming left, at best. It will go from high 90's to low 80's by middle of Sept in St.Louis.