+ Reply to Thread
Results 1 to 7 of 7

Thread: New test Kit arrived today. Here are the numbers!

  1. #1
    Join Date
    Aug 2006
    Location
    GA
    Posts
    19

    Default New test Kit arrived today. Here are the numbers!

    TC 1.5
    CC 1.0
    FC .5


    PH 7.8
    TA 160
    CH 60
    CYA 65

    So I know this.
    Water look's crystal clear
    New pool last week
    I have a 24' above ground pool
    15,500 gallons
    22' sand filter
    2 speed pump

    and I am using BBB

    So I need to add what?

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: New test Kit arrived today. Here are the numbers!

    FC + CC = TC. Always. So, first you need to straighten out your chlorine readings. Your ph is fine at 7.8, but you don't want it any higher. Your alk is OK at 160 for a vinyl pool. Your cya is a little higher than I like, but OK at 65 if you maintain adequate chlorine levels as a result. See the "best guess" chart in the sticky at the top of the chlorine forum.

  3. #3
    Join Date
    Aug 2006
    Location
    GA
    Posts
    19

    Default Re: New test Kit arrived today. Here are the numbers!

    FC + CC = TC. Always. So, first you need to straighten out your chlorine readings


    Is that not what mine is?

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: New test Kit arrived today. Here are the numbers!

    Yes! For some reason I just read it wrong. I guess I'm just used to seeing people list their TC last and for some reason, I just misread it. My apologies.

  5. #5
    Join Date
    Aug 2006
    Location
    GA
    Posts
    19

    Default Re: New test Kit arrived today. Here are the numbers!

    no problem at all. I thought I was doing something wrong.

  6. #6
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: New test Kit arrived today. Here are the numbers!

    Just add beer and women
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  7. #7
    Join Date
    May 2006
    Location
    Tennessee
    Age
    57
    Posts
    234

    Default Re: New test Kit arrived today. Here are the numbers!

    Watermom
    Yes! For some reason I just read it wrong. I guess I'm just used to seeing people list their TC last and for some reason, I just misread it. My apologies.
    Watermom
    I had to go back and look twice myself.

    Mark
    With a CYA of 65 you need to boost your chlorine 3 to 6 going by the best guess chart. So I would add some bleach to get it up there and I am sure some one has given you the link to bleach calc.
    With a TA of 160 you might have a hard time keeping your pH down. You might want to drop by the hardware store and grab some muratic acid(be carefull with this stuff). If the pH goes up I would drop it down abit. If you have a hard time keeping it in line you can drop the ALK by following this thread. Ben's method works very well but you will need a fountain to get the fastest drops.
    Main thing to add to your pool is fun and family... enjoy the new pool.
    Steve

+ Reply to Thread

Similar Threads

  1. Taylor Kit came today, here's my numbers
    By RedwingT in forum Pool Chemistry for Intex-type Pools
    Replies: 9
    Last Post: 07-28-2012, 03:54 PM
  2. Taylor 2006c arrived
    By jeremyweber in forum Testing and Adjusting Pool Water Chemistry
    Replies: 12
    Last Post: 06-07-2011, 11:25 AM
  3. Today's test results, please advise....
    By klondrie in forum DPD-FAS based testing
    Replies: 1
    Last Post: 08-02-2006, 04:56 PM
  4. Received PS234 kit today and here are numbers
    By KPROMERO in forum DPD-FAS based testing
    Replies: 3
    Last Post: 06-08-2006, 08:01 PM
  5. First Run, Kit arrived today
    By Condo Steve in forum DPD-FAS based testing
    Replies: 3
    Last Post: 05-24-2006, 10:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts