+ Reply to Thread
Results 1 to 10 of 14

Thread: Copper in water - ok to use bleach?

Hybrid View

  1. #1
    Join Date
    Aug 2006
    Location
    West Palm Beach, FL
    Posts
    32

    Default Re: Copper in water - ok to use bleach?

    You need to hold your Shock value (25 ppm) until the pool is crystal clear. Adding chlorine everyday, 2, or 3 times a day to maintain 25 ppm. After you pool is able to maintain chlorine level ( dropping 1 or 2 ppm a day is ok) you can let it drift down to 8 - 15 ppm and maintain it at the level, adding chlorine everyday as necessary. IF you maintain the pool at these levels, there is no need for a weekly shock.

    You need to get a good drop-based test kit, (strips do not cut it) whether the 5 way HTH kit from Walmart or the kit through this site. 5 minutes a day for testing and adding bleach is all you will need.

  2. #2
    mccato is offline ** No working email address ** mccato 0
    Join Date
    Dec 1969
    Location
    Ga
    Posts
    30

    Default Re: Copper in water - ok to use bleach?

    OK, thanks for that explanation. I understand; except for one detail. My pool is crystal clear and has been all summer. I saw green algae on the skimmer last week, but I brush it every day and have not seen anymore since. I'll do as you say and keep a constant check on it.

    Can we swim in a pool with 8-15 ppm chlorine?

    Thanks again!

  3. #3
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Copper in water - ok to use bleach?

    With a CYA that high, yes, you can swim in it--it would be the same as swimming in a pool with lower chlorine and CYA, proportionally.

    Janet

  4. #4
    mccato is offline ** No working email address ** mccato 0
    Join Date
    Dec 1969
    Location
    Ga
    Posts
    30

    Default Re: Copper in water - ok to use bleach?

    Thanks, Janet! I wish the pool stores in my area had as good an understanding of CYA as you guys do. I appreciate the help!

+ Reply to Thread

Similar Threads

  1. Switching from Pristine Blue/Copper in Water
    By jman1975 in forum Dealing with Stains & Metals, . . . and 'Minerals' & 'Ions',
    Replies: 1
    Last Post: 06-24-2013, 12:54 PM
  2. Salt water magic and Intex salt water/copper ionization system
    By enchantedmountain in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 6
    Last Post: 06-10-2011, 04:37 PM
  3. Copper in water
    By Bergerman in forum Dealing with Stains & Metals, . . . and 'Minerals' & 'Ions',
    Replies: 5
    Last Post: 07-30-2006, 12:30 PM
  4. copper and Salt Water Generator
    By kwhoughton in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 07-05-2006, 10:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts