Odd Stains, not Algae

[GJBenn85]

On Sunday last weekend, I added a sequestering agent and started reducing the chlorine in the pool. On Wednesday, I added the absorbic acid and some more sequestering agent, with chlorine at zero, and switched to circulate rather than filter. The stains have disappeared but now the pool water is very cloudy. I have been running the filter nonstop since Wednesday (and have backwashed it plenty) and started producing chlorine again on Friday. There has been no appreciable difference in the cloudiness in about 2 days worth of filtering. I will check the balance today and post the numbers but is there anything that can be done to speed up the process?

[mbar]

You are seeing the ascorbic acid and metals that have gone back into solution, or precipitated into salts or flakes. This is making the pool cloudy - you can start to bring up the chlorine. You can slowly take it up to the high end of your cya table, and then even higher if you do it slowly and watch for the stains to reappear. Just be sure to keep your ph low while adding chlorine. The pool will eventually clear - you can put a skimmer sock on the skimmer to help catch small particles.

Or, you can use a floc, let it circulate, turn the filter off and let the precipitate fall and vacuum to waste. It is up to you - if you want to add less chemical to the water, then just have POP, and your water will clear with chlorine and filtering. Please ask any other questions you may have