Quote Originally Posted by waste
If you go the 'tiger-flex' way, DON'T USE CLAMPS !!!!!!!!!!, use schedual 40 fittings and PVC primer and glue to secure them (threaded reducers with a 1 1/2" slip fitting are available at any decent hardware store). Tape whichever threaded reducers with 3 wraps (all the way up the threads) and glue the 'bell' end to the pipe. Make sure you read the instructions on the can of glue to insure a good seal. I've taken a number of 'shortcuts' in my explanation, but following this will insure a good connection. (if you've any questions about what I've advised, ask and I'll go into further detail). I beg for you to trust me on this, as I spend a lot of time every year correcting leaks caused by homeowners using tigerflex and clamps. (it's only a small % of fixes I have to do as opposed to those due to installers using 'black poly' - but that's something for the 'China Shop'. )
T-cal, welcome to the forum, I want you to have a great 'pool experience' so am trying to prevent your doing something that will be a continual headache. Do it once, do it right and enjoy the pool.

Is there any way you could attach a photo of the correct fittings? I have silver clamps around all of my hoses that tighten w/ a screw and I DO NOT want to wake up one morning and have to refill the pool. I would love to see how your hoses are attached. Also, where would one find "tiger flex" hoses or GOOD quality hoses. I'm all about a little extra $ for a better lasting "anything".
Thanks