Results 1 to 10 of 11

Thread: Pump Size

Threaded View

  1. #5
    duraleigh Guest

    Default Re: Pump Size

    Poolpup,

    Poolman's advice is on the money. I have a full-rated 1.5HP pump for a 43,000 gal. pool (2" plumbing) and I would've been a little more efficient with a full rated 1HP. My only saving grace is I have a very large sand filter (950 lbs) so my system is ok.....just could've saved some money with less pump and had a little better system.

    (Full-rated pumps are about .5HP stonger than up-rated pumps)

    Stu,

    based on your preliminary info, 1.5 sounds a little large for the pool....unless your going to drive both pool and spa from one pump.....then maybe a 2hp 2-speed would be a good mix. Others more experienced with spas than me will chime in soon and give you a better-educated answer.
    Last edited by duraleigh; 08-26-2006 at 12:32 PM.

Similar Threads

  1. Pump Size?
    By Manny Cutes in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 04-10-2011, 10:00 PM
  2. Pump Size
    By poolpup in forum In-Ground Pool Construction and Repair
    Replies: 6
    Last Post: 08-20-2006, 10:10 AM
  3. Need New Pump What size HP?
    By Joe44 in forum Above-Ground Pool Construction & Repair
    Replies: 1
    Last Post: 07-31-2006, 09:07 PM
  4. Pump size
    By BigSplash in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 05-13-2006, 01:18 PM
  5. Pump size
    By ssweaser in forum Above-Ground Pool Construction & Repair
    Replies: 1
    Last Post: 05-12-2006, 06:57 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts