Results 1 to 6 of 6

Thread: I read some of your Ph discussion

Threaded View

  1. #2
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    66
    Posts
    2,226

    Default Re: I read some of your Ph discussion

    Quote Originally Posted by Madty
    But I'm still confused. I checked today- TA is 80 and ph is around 7.5. Is that ok? Some say go TA to 110 others saystay there. My CYA is only around 30. Should I also raise this for better protection of my CL?

    Thanks
    I'm sorry your confused. A TA of 80 is fine and a pH of 7.5 is also fine. Is there any particular reason why others are saying to raise the TA to 110? Did you mention any specific problems? I think the 80 will work fine for you. Generally, the only reason you would want to use a higher TA would be if you were using Tri-Chlor tablets (which are very acidic) as your chlorine source (which is not a good idea).

    As for CYA, the irony is that you don't want to use too much because even though it will make your chlorine last longer, you'll have to have a higher Total Free Chlorine (FC) level at the higher CYA level to maintain adequate disinfection and to prevent algae growth (see Ben's CYA/FC Chart). Nevertheless you probably have some sort of chlorine usage per day already so you can't take your CYA too far down or you will run out of chlorine during the day (I assume you do not have a salt water chlorine generator since your CYA isn't high enough for those devices). At the extreme of no CYA, you technically only need 0.05 ppm or so FC, but as you can imagine, there is no way you could possibly maintain such a low level of FC everywhere in your pool, so you need enough CYA as a "chlorine buffer" to hold chlorine in reserve to last as long as you need (i.e. until the next time you add more chlorine to your pool).

    With a CYA of 30, Ben's chart says to have from 3 to 6 ppm of chlorine. If you added chlorine at night to get to 6 ppm, does it only go down to 3 ppm by the next night? If so (or it goes down by less to stay above 3), then you've got the right amount of CYA. If it goes down below 3, then you may need more CYA and you will then also need to add more chlorine. You'll end up using more chlorine per day, but you'll never get below the "Min" amount and that's the most important thing.

    Richard
    Last edited by chem geek; 08-17-2006 at 11:31 AM.

Similar Threads

  1. I read the BBB method
    By richiev in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 06-06-2011, 09:25 AM
  2. Deck Options - pictures and discussion
    By SeanB. in forum General Interest
    Replies: 9
    Last Post: 04-25-2007, 10:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts