New Pool Install

[hrsdennis]

Hi, Oval pools are a little different. I set the sides first. They are all a little different and all require blocks in different places. Follow the directions closely for proper side support setup. With that done lay out your ends just like a round pool. Then place your blocks. With the braces set the rest of the job is just like a round pool. The brace setup is also the part that most beginners mess up badly, so go slow and follow the instructions.

Dennis

[NWMNMom]

This one is a buttress free so no braces other than the straps underneath and the uprights.

[hrsdennis]

On a buttress free pool they have just transferred the support from outside the pool to underneath the pool. The weight of the water on the large pressure plates holds the sides straight. Installation is still the same. Do the sides first.

Dennis