I defer to Richard in the chemistry involved in a SWCG operation, but I did a writeup in the thread mentioned in my signature, which was simplified for the newbies with SWCGs.

I do know that the pH tended to rise before and after I installed the SWCG 8 years ago. The rise is not pronounced as it used to be, as I was maintaining a 5 - 6 ppm chlorine range from algae that occured in the old Diamond Brite plaster.

With the new plaster which is still curing, I am adding a pint of muriatic acid every three days and holding 7.4 - 7.6 pH with hardly any bather load.

One has to remember after all the chemistry that Richard and I have mentioned whether by bleach or SWCG, the net result is an increase in caustic soda (NaOH), which has to be converted back to salt with muriatic acid.

This is my interpretation and Richard can chip in and correct if necessary.

Pat