+ Reply to Thread
Results 1 to 3 of 3

Thread: What PSI does PVC need to be?

  1. 04-16-2006 07:08 PM #1
    Crispyc21
    Crispyc21 is offline ** No working email address ** Crispyc21 0
    Join Date
    Dec 1969
    Location
    Woodbridge, VA
    Posts
    16

    Default What PSI does PVC need to be?

    I have two slow leaks I知 going to take care of this year. I値l have to replace a short run of PVC piping, a couple 90degree turns and two screw-in connectors (one from filter out and the other screws into multi-switch in side (the thing that you switch between filter/backwash..exc).
    Should I be able to get this stuff at Home Depot or Lowes?
    Reply With Quote Reply With Quote
  2. 04-16-2006 07:52 PM #2
    duraleigh Guest

    Default Re: What PSI does PVC need to be?

    Yep! Get Schedule 40. It's printed right on the pipe...sometimes as (sch. 40)

    Dave S.
    Reply With Quote Reply With Quote
  3. 04-17-2006 10:16 AM #3
    Crispyc21
    Crispyc21 is offline ** No working email address ** Crispyc21 0
    Join Date
    Dec 1969
    Location
    Woodbridge, VA
    Posts
    16

    Default Re: What PSI does PVC need to be?

    Great thanks!
    Reply With Quote Reply With Quote
+ Reply to Thread
« What Size Pump And Filter | $100 diff. tween 12 and 16 MIL solar blanket? »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules