+ Reply to Thread
Results 1 to 10 of 13

Thread: Foam Bottom

Hybrid View

  1. #1
    RavenNS is offline Established User Weir Watcher RavenNS Not to be trusted
    Join Date
    Jul 2006
    Location
    Nova Scotia CANADA
    Posts
    183

    Default Re: Foam Bottom

    SWEET... Science Rules !!!

  2. #2
    haze_1956 is offline ** No working email address ** Thread Analyst haze_1956 0
    Join Date
    Dec 2004
    Location
    nj, usa.
    Posts
    114

    Default Re: Foam Bottom

    I see 4x8 foot sheets at most Home Depot's, and you can usually find it at vinyl siding, supply houses.

  3. #3
    Join Date
    Aug 2006
    Posts
    2

    Default Re: Foam Bottom

    I had calculated the water at about 1.8psi at about 4' deep so I wasn't concerned about the water crushing it, more concerded about kids jumping in off deck and landing on their heels hard. Not sure if that would dent it.
    It looks like the foamular product from Owens Corning is what I'm looking for. I'll call around tomorrow. Thanks for your input. Ltvanloon.

  4. #4
    Join Date
    May 2006
    Posts
    6

    Default Re: Foam Bottom

    I have a question with the foam base. Does it have to be the blue or pink foam or is that they better option?
    I went to the local building supply store and they said that you can use the white plastispan normal Styrofoam stuff. I'm trying to get the most economical pool base, possible and the platispan can be bought at home depot for 12 dollars for 1"x4'x8' sheets that have plastic on both side to help keep it from breaking
    .
    My pool install directions say you can use Styrofoam but don't say exactly what kind.
    http://www.pioneerfamilypools.ca/man...ance-Round.pdf

    Their is no way I can get large quantities of sand in my back yard either, if I use sand only it will need to be carried in by the bag which could get expensive and tiring. We also seem to have a fair bit of small gravel rocks in out back yard that the more we level the more we find that I don't think I can get out. Has anyone tried sand and the laminated floor under pad foam stuff to help the bottom be smooth??

    The pool is an AG 15' round and we started the leveling process today. It will probably be a few more days before we get it level.
    Thanks
    Last edited by Lauralai; 05-28-2008 at 01:41 AM.

  5. #5
    Join Date
    Aug 2006
    Posts
    1

    Default Re: Foam Bottom

    Iv been trying to find Owens Corrning Foamular with no luck. I even called them and they refused to give out a distributer.

  6. #6
    Join Date
    Dec 1969
    Location
    .
    Posts
    2

    Default Re: Foam Bottom

    We just had the "HAPPY BOTTOM" put in our new AG pool and it is the BEST thing we could have done!

  7. #7
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Foam Bottom

    Quote Originally Posted by GerardC View Post
    We just had the "HAPPY BOTTOM" put in our new AG pool and it is the BEST thing we could have done!
    Isn't that a soft foam? I like the idea of foam--I've not been at all happy with the sand bottom I have and I think I only have a couple more years with this liner.
    Carl

+ Reply to Thread

Similar Threads

  1. Can't get bottom flat, can pool bottom be slightly concave/bowl shaped?
    By SkierDude in forum Intex-type Pool Setup & Operations
    Replies: 5
    Last Post: 06-30-2013, 11:13 AM
  2. Foam bottom and Cove
    By CliffTex in forum Above-Ground Pool Construction & Repair
    Replies: 12
    Last Post: 09-11-2006, 01:04 PM
  3. Do you HAVE to use a bottom and foam?
    By denanbob in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 06-11-2006, 10:33 AM
  4. Foam bottom with sand cove
    By scottfly in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 05-13-2006, 09:04 PM
  5. Foam Bottom
    By nicker in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 04-27-2006, 12:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts