Broken float support on Polaris 180 - best repair?

[RavenNS]

IMHO, I think Marine expoxy would be a good way to go since it has the metal structual support...
if the metal wasn't there, I would guess that it wouldn't work because of the stress of the float.

Intersted in what others will suggest though, so hang on before you glue it just yet

[aquarium]

I drilled through the plastic and stainless from the side in two places - one near the side of the upright tube and one out along the support. Then I used a couple of small stainless bolts and nuts so everything was at least bolted together. Then a lot of marine epoxy. Seems to be working okay.