I got my new whisperflo pump in today and started taking out the old hayward. I know lots of stuff, but apparently one of them isn't PVC. Never had to work with it.
So, I started unscrewing the top fitting on my pump (pressure side) and it came out about 3/4 of the way before it backed into the fitting above it. The suction side input won't budge at all. The thread will slightly move but the pipe dope on the back won't.
Am I just suppose to hacksaw these connections off? I know I'm going to have to slightly change things due to the new pump, but I'm not exactly sure how to go about it, or get started. Figure I'll ask the experts instead first instead of posting a Don't do this thread.