+ Reply to Thread
Results 1 to 5 of 5

Thread: How do I add bleach?

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    14

    Default Re: How do I add bleach?

    I add all my chemicals through skimmer slowly. I usually turn oof chlorinator but have forgotten with no ill effect.

  2. #2
    Join Date
    Aug 2006
    Posts
    1

    Default Re: How do I add bleach?

    My inline chlorinator specifically requires that it be installed AFTER all other items; I've been told to NEVER add chemicals to the skimmer.
    The reason for bothe of these instructions, (I believe) is to avoid causing any damage to the internals of the equipment. Sounds like good advise.
    so I would add chlorine at the return or around the edge of pool to allow for dilution before it gets into equipment

  3. #3
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    66
    Posts
    2,226

    Default Re: How do I add bleach?

    This linked thread goes into more detail on this question, but the conclusion is the same. Pouring chlorine over a return in your pool or even dumping it into the main pool area (with the pump running) will not cause any problems. Pouring it into your skimmer may cause problems if you have an inline chlorinator for Tri-Chlor pucks, but if you don't then it's probably OK (even though I argued that there might be some small risk to equipment or filters).

    Richard
    Last edited by chem geek; 08-10-2006 at 10:53 PM.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts