+ Reply to Thread
Results 1 to 10 of 16

Thread: Opening after Katrina

Hybrid View

  1. #1
    Join Date
    Jul 2006
    Location
    Pearland, TX (Houston suburb)
    Posts
    89

    Default Re: Opening after Katrina

    Quote Originally Posted by Daggit View Post
    As for staining, the house sale disclosure said that the pool needed replastering, so I figure that it will get handled soon anyway. Oh, and I understand that the borax is to increase pH...I figured that by the time I had 50 or so cumulative gallons of bleach in the pool, I'd need some pH adjustment. I hadn't actually run the calculations to see how much would be needed, though.
    It may be too late to ask this queston but just curious. If you plan to replaster almost immediately, why not drain the pool, drill you 4-5 vent holes (bottom of pool) and high pressure wash the inside. I understand the low water table but your vent holes should help prevent your pool from floating. That should drastically cut down on your expenses and perhaps upgrade to an aggregate pool finish..

  2. #2
    PopcornGirl is offline ** No working email address ** Thread Analyst PopcornGirl 0
    Join Date
    Mar 2006
    Location
    Baton Rouge, LA
    Posts
    70

    Question Re: Opening after Katrina

    I am also in SE Louisiana (Prairieville/Gonzales area) and I am wondering how everything went with this...?

    Did you get everything fixed up? Which route did you go and how does it look now? If you're still around, it would be great to have an update!

+ Reply to Thread

Similar Threads

  1. CYA at opening
    By PBLsQuad450 in forum Using Chlorine and Chlorinating Chemicals
    Replies: 3
    Last Post: 05-16-2011, 09:48 PM
  2. Will I need vac for opening?
    By poolbee in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 3
    Last Post: 04-21-2007, 02:04 PM
  3. Low pH upon opening
    By kacy in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 2
    Last Post: 05-11-2006, 10:14 AM
  4. Opening Day
    By TwistyKat in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 11
    Last Post: 05-06-2006, 08:46 AM
  5. When to let Cl come down after opening
    By Davenj in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 9
    Last Post: 04-19-2006, 02:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts