Results 1 to 10 of 11

Thread: SWG..before or after large heater

Threaded View

  1. 04-18-2006 12:37 PM #10
    Davenj
    Davenj is offline Lifetime Member Thread Analyst Davenj 0
    Join Date
    Dec 1969
    Location
    Jersey Shore
    Posts
    100

    Default Re: SWG..before or after large heater

    I have an autopilot system. Would it be feasible to move the sensor section between the filter and heater. Replace the sensor section with a piece of pipe and leave the cell after the heater. Just a thought.
    You would have to be carefull not to turn off or reduce the flow thru the cell. Since the flow sensor would not be at the cell.

    Dave
    Last edited by Davenj; 04-18-2006 at 01:29 PM.
    Reply With Quote Reply With Quote
« AquaRite - Low Chlorine Output | Controlling 2-speed pump motors with Aqualogic or Autopilot? »

Similar Threads

  1. Large solar cover help
    By srbaker in forum Pool Equipment & Operations
    Replies: 14
    Last Post: 06-24-2007, 06:08 PM
  2. SWG & Large Liner Pool
    By donfranko in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 5
    Last Post: 04-27-2007, 01:03 AM
  3. 3 Large Holes
    By newbie2pools in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 01-16-2007, 10:12 AM
  4. Anyone using a SWG on a large pool?
    By donfranko in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 07-13-2006, 02:28 AM
  5. Large spiders in pool
    By gumbeaux71 in forum Pools, Pets and Creepy Critters
    Replies: 8
    Last Post: 05-19-2006, 03:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules