I bought the house with pool 8 months back never having issues with the pool till the past two months i am thinking its the filter that is not sitting tight so it brings me to the question
How often do you replace your filter?
I bought the house with pool 8 months back never having issues with the pool till the past two months i am thinking its the filter that is not sitting tight so it brings me to the question
How often do you replace your filter?
Last edited by bkny1055; 08-08-2006 at 07:38 PM.
Not sure what you mean by "sitting tight".
We here do not change filters unless there is a very good reason. Eg, if the filter is so old that it is difficult to replace parts, or not satisfied with what the filter is doing.
To better answer your question, could give us more details about the filter and your particular pool system, i.e. pool type, size in gallons, pump size, chlorinating method, etc.
Pat
20,000 Gallon IG Diamond Brite pool, 1.5 HP Sta-Rite pump, Hayward Microclear DE3600 filter, Favco solar panels, Poolpilot DIG-220 with SC-48 cell.
+ SWCG OPERATION thread here: http://www.poolforum.com/pf2/showthread.php?t=1226
+ SWCG Running Costs post here: http://www.poolforum.com/pf2/showthread.php?t=316
+ Effective Stabilizer addition post here: http://www.poolforum.com/pf2/showthread.php?p=6645
sucks through filter bottom
comes out through here
and it looks like the pressure is moving the filter on the top and
allowing dirt to come out and bypass the filter going back into the jets
on the bottom
i have this filter housing
it has a paper filter inside model# Unicell C9699
![]()
Last edited by bkny1055; 08-08-2006 at 07:42 PM.
Looks like a cartridge filter. It will have to be replaced. I would a Google search with that model # cartridge and see what happens.
Good luck.
Pat
20,000 Gallon IG Diamond Brite pool, 1.5 HP Sta-Rite pump, Hayward Microclear DE3600 filter, Favco solar panels, Poolpilot DIG-220 with SC-48 cell.
+ SWCG OPERATION thread here: http://www.poolforum.com/pf2/showthread.php?t=1226
+ SWCG Running Costs post here: http://www.poolforum.com/pf2/showthread.php?t=316
+ Effective Stabilizer addition post here: http://www.poolforum.com/pf2/showthread.php?p=6645
It might be a good idea to go ahead and get the cartridge as a spare. Jacuzzi will soon no longer be manufactured and parts (including after-market like the Unicell cartridge you have) may become harder to find.
They only need replacing when worn out. Are the bands torn? Is the fabric "hairy?" Will it not clean and allow water through it?
To: thepoolman1
It might be a good idea to go ahead and get the cartridge as a spare. Jacuzzi will soon no longer be manufactured and parts (including after-market like the Unicell cartridge you have) may become harder to find.
They only need replacing when worn out. Are the bands torn? Is the fabric "hairy?" Will it not clean and allow water through it?
I just bought a new cartridge
Thanks for the heads up on them not selling it soon
It was not worn our
It had a torn Band " yes "
Fabric Hairy " yes "
not clean and allow water through it " YES YES " i guess i needed a new one
Thanks for the information
---------------------------------------------------------------------
To: PatL34
Looks like a cartridge filter. It will have to be replaced. I would a Google search with that model # cartridge and see what happens.
Yes i just bought a new one seems like the rubber on top is going bad and has a broken band
I searched on www.google and www.pricegrabber.com they are about
60.00 bucks so instead of just waiting on shippment i went to pinch-a-penny and got one off the shelf sometimes best for 70.00 bucks
Thanks guys for the information i will keep you posted on my pools condition
Bookmarks