Polaris AutoClear Error 94??

[APhoenixRisen]

Hi: Thanks for replying. I actually did clean it yesterday. When I opened it, it didn't look like it had any deposits or scale. But I flushed it anyway. I still have that error. Is there anything else that could cause this? I just bought this house from a guy who had just installed it a few months before, so he really has no clue. All he said was "dont worry, it takes care of itself".

It's strange because when I push the TEST button, the lights are lit as high as the top ones and still the "add salt" lights at the bottom are on also. Could another imbalance cause this? If so, is there a comprehensive test that would detect what demon is haunting my pool?

Thanks, Phoenix

[thepoolman1]

Try cleaning the cell in the recommended acid solution. DO NOT go stronger. Immerse the cell in the solution until the bubbling stops, rinse, re-install.

Error "94" can also mean a cut in the cord running to the cell or it may be unplugged. You might want to carefully examine that.

If the unit is only a few months old, Polaris MIGHT help. The warranty is to the original owner, but they are a good company and MIGHT send a warranty tech.