You can probably test your PH level after adding Borax a few hours after the pump is running. You NEED to raise your PH level up to at least 7.0 - better if between 7.4-7.6
Re: Pool Just Filled, Want to do it Right First Time
You can probably test your PH level after adding Borax a few hours after the pump is running. You NEED to raise your PH level up to at least 7.0 - better if between 7.4-7.6
Completed 8/21/06
14,000 gallon 3'-6' concrete pool with Diamond Brite
Spa with spillway
250K BTU gas heater (for spa)
SWCG - Aqua Rite
Hayward Super II Pump - Cartridge filter
See pictures here http://www.philsimmons.com/family/ga...mages&keyword=
Posting Permissions
Reply With Quote
Bookmarks