SWG and pool

[deep_blue]

Thanks so much for the quick and complete response... makes sense.

I should say, that I have SWG and suddenly I am worried if I did the correct thing since the WAF is low now due to what's occurring.

The stainless panels are attached to nylon supports with screws and it seems that where the panels "touch or almost touch" I get this bubbly, rust looking stuff that disappears when you blow water on it or wipe it, puff and it is gone.

Somewhere I read that connecting the metal parts (stainless steel benches) to a bonded ground is important....am I even close to being right ?
does that help ? what metal could I use ?

You are right about the SWG and my Jandy 700 can put out a lot of chlorine so I have been running it for a low consistent amount of time. Seems to be controllable. I do have a separate timer that I can use in case.

I will get a water test for copper and iron.... maybe that might help knowing.

I use about 3000 ppm salt also.

Please feel free to inform, I have learned soo much on this forum already.

Thanks in advance.