+ Reply to Thread
Results 1 to 10 of 15

Thread: How would you rate this proposal

Hybrid View

  1. #1
    SeanB. is offline --General User-- Weir Watcher SeanB. 0
    Join Date
    Aug 2006
    Location
    Missouri City, Texas
    Posts
    207

    Default Re: How would you rate this proposal

    My builder said the normal price was $300, but he was going to install it for $175. I chose the manual fill for free, but ended up getting the autofill by mistake anyway.

    I was initially concerned over what might happen if the float switch failed and overfilled the pool. But after talking to some co-workers with pools who have done manual top offs and forgotten about them for hours, I realized the valve is less likely to fail than I am. lol Besides, if I want to do it manually, I can always close the valve.

    I don't think it's a must have, but will probably be nice.
    Site owner -- www.troublefreepool.com

  2. #2
    Join Date
    May 2006
    Location
    Sugar Land, Texas
    Posts
    183

    Default Re: How would you rate this proposal

    Quote Originally Posted by SeanB. View Post
    I was initially concerned over what might happen if the float switch failed and overfilled the pool.
    Sean, don't you have an overflow line?
    Pool owner - contract signed 21Aug2006; HOA approval granted; complete - existing patio demolition; excavation; rebar; embedded plumbing; gunite; plumbing; electrical; tile and coping; decking; plaster; pool fill; acid start-up; regular start-up; pool school; gas meter upgrade; additional of salt; PDA remote programming.

  3. #3
    SeanB. is offline --General User-- Weir Watcher SeanB. 0
    Join Date
    Aug 2006
    Location
    Missouri City, Texas
    Posts
    207

    Default Re: How would you rate this proposal

    It will overflow out one side to the yard which is graded away from the house via a swale to the street. Either way, I don't want to end up wasting water. I'll be keeping a close eye on it and checking the valve periodically.
    Site owner -- www.troublefreepool.com

  4. #4
    Join Date
    May 2006
    Location
    Sugar Land, Texas
    Posts
    183

    Default Re: How would you rate this proposal

    I have been told that it's a good idea to disable your autofill for maybe the first couple of months after your pool is finished.

    If you have a leak in the pool which isn't manifesting itself in a puddle in the yard, the autofill can hide it and you won't have any clue - well, at least until the first water bill shows up.
    Pool owner - contract signed 21Aug2006; HOA approval granted; complete - existing patio demolition; excavation; rebar; embedded plumbing; gunite; plumbing; electrical; tile and coping; decking; plaster; pool fill; acid start-up; regular start-up; pool school; gas meter upgrade; additional of salt; PDA remote programming.

+ Reply to Thread

Similar Threads

  1. Flow rate sensor?
    By henryb in forum Pool Electronics
    Replies: 1
    Last Post: 08-31-2013, 02:51 PM
  2. Getting a better turn over rate
    By Ecozadd in forum Commercial Pool Users, Managers & Workers
    Replies: 3
    Last Post: 07-30-2012, 04:45 PM
  3. Pump Rate
    By iwannapool in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 06-22-2007, 06:38 PM
  4. PVC Maximum Flow Rate?
    By catnip in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 03-14-2007, 12:15 PM
  5. Design flow rate vs maximum flow rate...
    By cruzmisl in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 06-27-2006, 06:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts