Jandy Aquapure SWG Circuit Boad Problem

[thomas_CT]

what was the problem prior to replacing it? My cell is not making any chlorine and i was wondering if that could be a circuit board issue. i clean cell regularly, there is no debris or calcium buildup.

[guild1]

My cell wasn't making enough chlorine. The tech diagonised it as working intermitently. He said that the old circuit board design had caused many odd problems.

[guild1]

Since the circuit board was replaced the unit has been producing 5 times the amount of chlorine, while only running half the time. What a saving on electric it should be!

[klharmon]

Well my AquaPure 1400 stopped making chlorine with the code 172 181
I may need a circuit board replacement

[mkamp1515]

I had the same code and problem in the spring and the pool builder replaced my circuitboard. Luckily mine was only a year old and was still under warranty. Been working wonderfully since and seems to be more efficient.

[keastman]

I'm curious what you folks with Aquapures run your production % at. I had mine at 30 and seemed to be keeping Cl around 3ppm with a CYA level 30-40. I bumped it up to 40 since it seemed that I was seeing too much sediment on the steps when I brushed the pool and thought it could be algae starting. All seems better now. Thanks

[eljefe281]

I'm curious what you folks with Aquapures run your production % at. I had mine at 30 and seemed to be keeping Cl around 3ppm with a CYA level 30-40. I bumped it up to 40 since it seemed that I was seeing too much sediment on the steps when I brushed the pool and thought it could be algae starting. All seems better now. Thanks

I believe that, for this information to be useful, it needs to be accompanied by the pool volume and whether the user is running a 700 or 1400 system.