I think perhaps what you saw related to CC, or combined chloramines. These are the baddies, not the free chlorine.Originally Posted by Jakebear
I think perhaps what you saw related to CC, or combined chloramines. These are the baddies, not the free chlorine.Originally Posted by Jakebear
~Grace
Avid reader of this forum
but alas, no pool... yet!
So when I take the FC up to 20 ppm ----- How long do I keep it that high??
I still don't understand how swimming at 20 ppm can be OK --- If it bleaches your suit it can't be good for the various exposed organs, the skin being the biggest and most exposed. I think I understand the relationship of the CYA and the effectiveness of FC but it is not like it's (the CL) not there.
Also I do not have any CC so again how does this figure into the need to shock equation.
You are using chlorine overnight? If so - it is because you have something alive in your pool that is using the chlorine. Right now it has not grown to a level that looks bad, but it will continue to grow and use chlorine until you kill it with high chlorine levels.Originally Posted by Jakebear
Completed 8/21/06
14,000 gallon 3'-6' concrete pool with Diamond Brite
Spa with spillway
250K BTU gas heater (for spa)
SWCG - Aqua Rite
Hayward Super II Pump - Cartridge filter
See pictures here http://www.philsimmons.com/family/ga...mages&keyword=
OK and thanks to all ----- BUT
How long do I maintain the FC at 20 ppm?????
I've been searching this site since my last post and have not found that information.
I would suggest taking it up to 20ppms until your water clears up, or you hold it overnight. It probably won't take long, because you have not shown any combined chlorine. You can tell it is all dead because your water will be clear, and there will be dead stuff on the bottom of the pool. Once the water is clear, or you don't use any chlorine overnight, you can let the chlorine fall back down to normal levels for your cya.
Northeast PA
16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5
OK --- Here goes nothin' --- NO swimming tomorrow though -- I still don't buy it's healthy!!!
Read this post:
http://www.poolforum.com/pf2/showthr...hlight=dangers
Read them all, especially the one by Pool Doc
Last edited by mbar; 08-05-2006 at 12:20 AM.
Northeast PA
16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5
Hi, Jake,
Our family swims all the time at shock level. It has actually improved my son's grades. He's (we call him "three-hands") at the top of his class in Computer Science....his keyboard proficiency is astounding.![]()
Seriously, no one should do anything they're not comfortable with but the ppm of chlorine in pools is amazingly low. When you wash your clothes and add Clorox, the chlorine ppm in the machine approaches 200ppm as nearly as I can figure.
I think you've gotten sound advice from Marie (mbar) and Dave (duraliegh) on shocking your water because of the high overnight chlorine consumption you're experiencing, but I wouldn't overlook the cal-hypo as the possible cause of your cloudy water. Cal-hypo can cause cloudy water temporarily and because you've been adding it regularly, it could well be the culprit here (for the cloudy water only, not for the chlorine consumption). Try bleach as your chlorine source instead and see if the cloudiness problem is ameliorated or eliminated.
Last edited by KurtV; 08-05-2006 at 01:52 PM.
Hmmm. Good catch, Kurt....that's a good thought.
Bookmarks