+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 22

Thread: Getting a new fiberglass pool

  1. #11
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Getting a new fiberglass pool

    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  2. #12
    Join Date
    Jul 2006
    Posts
    49

    Default Re: Getting a new fiberglass pool

    O.K. Marie. I'm starting to feel better after seeing your pool. It's gorgeous! I've never heard of using porcelain tiles before but it totally makes sense. Is there a reason you don't have a cantilevered edge? I thought that cantilever was the "standard" way to install. Also, did you have any problems with the installation like the pool being unlevel or leaks? And finally, did you pay in full before start-up? Our contract only leaves about $1,500 for a punchlist. Thanks so much.

    Tisha

  3. #13
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Getting a new fiberglass pool

    I don't know what you mean by cantilevered edge. My pool had a regular edge, but at first we had concrete around the pool, but the concrete was bad - it was pitting and flaking off. The company I had put in the pool also put in the concrete. After 2 years he finally admitted that the concrete was bad and wanted to redo it - but I chose to get my money back for the concrete, and then added more (much more) and had the tile put around it, because I didn't want to disturb the pool. The tile is a little higher than the pool which is a pain, but it was the only way the tile guy would do it - he didn't want to tile over the pool edge. The installation for the pool was great - we had no problems, no leaks, it is almost level, maybe off 1/2 to 1" on one side. I am completely happy with it the way he installed it. I did pay 1/2 down, then the other 1/2 when the pool went in. My pool included the pump & filter, heater, ladder, 3 ft of concrete around it & start up chemicals - unfortunately he used baquacil! All in all I would use the same pool company again, although the owner now has sold it to someone else, and I don't know how they are. Hope this helps, feel free to ask any other questions.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  4. #14
    Join Date
    Jul 2006
    Posts
    49

    Default Re: Getting a new fiberglass pool

    Hi Marie. Cantilever means that the concrete goes over the fiberglass lip of the pool. My PB just called today and said that he is pushing back the start date again. How long did your install take? We're expected to pay the bulk of the total cost as soon as they show up with the pool, before they actually install it. Was this your experience? Thanks.

    Tisha

  5. #15
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Getting a new fiberglass pool

    Yes, I think it was the second payment when the pool went in- it was 7!/2 years ago, so I am not too sure. Half was put down before the work started, and the rest when the pool went in the ground. I still had to pay for the rest of the concrete, which was separate from the quoted price of the pool. The pool went in on the same day. As soon as it was in they measured it to make sure it was level, then back filled around it and started to fill it right away. It was lifted in with a crane! It looked like a big bathtub. I know that it was then filled and then the pump was started up. It was a while before they did the concrete. It is really hard to remember the exact sequence - but I know it was really fast.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  6. #16
    keithw is offline Registered+ Thread Analyst keithw 0
    Join Date
    May 2006
    Posts
    64

    Default Re: Getting a new fiberglass pool

    I've got a CPC 12 x 24 that I installed myself. Upkeep on it is very easy. I did have to add vitamin C to kill some stains early on but it's been pretty stable since then. I can see hte advantages to a cantilevered edge. We tend to lose water when a quite a few people get active in the pool and an overhanging edge would eliminate that. Here's a link for my pool install,

    http://s36.photobucket.com/albums/e4...vab/?start=all

  7. #17
    gerri is offline Registered+ Thread Analyst gerri 0
    Join Date
    Jul 2006
    Location
    Upstate, SC
    Age
    54
    Posts
    108

    Default Re: Getting a new fiberglass pool

    here is my pool


  8. #18
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Getting a new fiberglass pool

    Gerri, I love all the landscaping around your pool, it is so beautiful! So is the pool! What do you have arond the pool, it is really great looking.

    KeithW, Is your pool out of the ground in some parts? You did a great job with the hardscape, and the color around the pool is beautiful, what kind of material is it?

    I love to see the fiberglass pools, and I notice that everyone's water is so clean and clear!!
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  9. #19
    gerri is offline Registered+ Thread Analyst gerri 0
    Join Date
    Jul 2006
    Location
    Upstate, SC
    Age
    54
    Posts
    108

    Default Re: Getting a new fiberglass pool

    Thanks Marie I have at the very back Angel Trumpets which get big and smell heavenly in the evenings and lambs ear edging. I have some roses in there but the tall tropical looking plants are cannas. I have several different leaf and bloom colors of those but in the very back as a foil I use the tallest burgundy leaf one called "Giant Russian Red". The cannas are tubers, very tough plants that multiply and the Angel Trumpets are easy to start from cuttings. If you would like to start any of these by your pool either now or in the Spring please let me know and I will pack a box up for you. I love sharing my plants.

  10. #20
    keithw is offline Registered+ Thread Analyst keithw 0
    Join Date
    May 2006
    Posts
    64

    Default Re: Getting a new fiberglass pool

    Marie,

    My pools sits about 1ft above ground level. I wanted it to be level with my exisiting deck which I extended out to the pool on that side. On the other side I built a brick wall around the pool, filled it with sand/dirt, poured cement pads on top, then carved cobblestone shapes in to the cement. The coloring is Acrylic cement stain. I used the same stain on the waterfall. All my equipment is stashed in the waterfall.



+ Reply to Thread

Similar Threads

  1. Off Level Fiberglass Pool
    By Rudy2012 in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 06-05-2012, 06:36 PM
  2. Fiberglass pool
    By Aboabdo in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 2
    Last Post: 08-01-2011, 04:57 PM
  3. Concrete in new fiberglass pool
    By Tishabiondy@natlmail.com in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 09-03-2006, 01:20 AM
  4. Fiberglass Pool
    By DONNIE in forum Dealing with Alkalinity and Calcium
    Replies: 7
    Last Post: 07-12-2006, 12:02 AM
  5. Fiberglass pool question - can they pop out?
    By tybeeware in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 06-05-2006, 12:32 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts