Re: Getting a new fiberglass pool
I don't know what you mean by cantilevered edge. My pool had a regular edge, but at first we had concrete around the pool, but the concrete was bad - it was pitting and flaking off. The company I had put in the pool also put in the concrete. After 2 years he finally admitted that the concrete was bad and wanted to redo it - but I chose to get my money back for the concrete, and then added more (much more) and had the tile put around it, because I didn't want to disturb the pool. The tile is a little higher than the pool which is a pain, but it was the only way the tile guy would do it - he didn't want to tile over the pool edge. The installation for the pool was great - we had no problems, no leaks, it is almost level, maybe off 1/2 to 1" on one side. I am completely happy with it the way he installed it. I did pay 1/2 down, then the other 1/2 when the pool went in. My pool included the pump & filter, heater, ladder, 3 ft of concrete around it & start up chemicals - unfortunately he used baquacil! All in all I would use the same pool company again, although the owner now has sold it to someone else, and I don't know how they are. Hope this helps, feel free to ask any other questions.
Northeast PA
16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5
Bookmarks