Mark,

Thanks, I took the thing apart and visually inspected the unit. Looked good, but when it is running a whole lot of water comes out the body, I thought it was water that was to drive the turbine. I guess I will take it apart completely and inspect the whole works, hose clamps included. How much water should leave the body due to turbine water? It seems like more than it should be to me. I guess if a hose clamp has failed there is not enough pressure to drive the whole system. Currently the jets to the bag don't even inflate the bag completely.


Also, I checked the impeller, clean as a whistle. Cleaned the whole filter system, pot filter, cartridge filter etc....One more question, how much pressure should be coming from the feed hose, seems somewhat weak, good flow but not a whole lot of pressure. I guess when pressured through the small ports in the cleaner the pressure rises. I did change the pressure ring from the small one to the larger one ( red to blue, I think), runs a little bit better, but still not enought pressure to run the system

Thanks, I'll let you know.
Rick