Quote Originally Posted by jimwnola
I have never owned either, just an Aquabot, which has isn't perfect either.

My question on both of these is, 'is there anyway to take these out of your pool and quickly put them away?'

I know most seem to just leave them in all the time, and maybe just remove for swimming. However, if you remove them to swim, I have to assume they must sit on the side of the pool the whole time you are using the pool. I know my wife would find that an eyesore and not like it. To put them away, it seems like you would have to disconnect all the hoses each time, which appears to be a lengthy process. For ones with longer hoses, then their is the problem of not bending them while put away. Does anyone have this type of cleaner and puts it away, out of sight, each time you are using your pool?
I have the Letro Legend II which is a pressure side cleaner. I roll the hose up and set it under the steps of my deck out of direct sunlight when not in use.

When I want to use it, I just carry it to the pool and throw it in and connect the end of the hose to the cleaner port in the pool, turn the port on and let it run for a few hours. When done or if we want to swim I just turn the cleaner port off, disconnect the hose from the pool, pull the cleaner out, wind up the hose and put it back under the steps. Very easy to do.

The hose does not get a "memory" since I keep it out of direct sunlight when not in use.

I personally would not want to leave it in the pool because we have a diving board and don't want anyone hitting the cleaner and getting hurt....or damaging the cleaner. :-)