-
Here it goes again.......Baq to bleach
Well I had to start a new thread because the other was becoming to long. In short I went to see the troll and took a water sample: see below. I dont understand her CL reading because my test kit shows much higher.......Water is still milky murky and no Baq present.
About my 5th day of conversion confusion.....
Saturation index -.64
Total dissolved solids 0
Free Chlorine 1.9
Total chlorine 2.0
Combined Chlor. .1
PH 7.1
Cyanuric Acid 29
Copper 0
Iron 0
Total Alkalinity 82
Adjusted Alk. 82
Calcium Hardness 180
I have been testing with my Walmart kit and doing the 1 part pool 2 parts distilled and getting a cl reading of 10-15ppm- I cant figure what is up.
troll reccomended adding 6.25 lbs of Baking soda????Im cluless!Any assistance from above is greatly appreciated
-
Re: Here it goes again.......Baq to bleach
bleach calc rec 10-11 gal based on troll reading
-
Re: Here it goes again.......Baq to bleach
Delete this and stay with your original thread......it's hard to follow where you're going if no one knows where you've been.
-
Re: Here it goes again.......Baq to bleach
Don't worry about the alkalinity for now--get your Chlorine back up to 15--if you let it stay around 2 or 3, you'll be forever getting this finished!!!
Bleach, bleach, bleach, it WILL happen, just don't give up!!
Janet
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks