I want to Thank everyone who responded to my problem!
I'm not so sure I have actually figured out how to use the bleach calculator correctly. I entered the number of gallons of water the pool holds (568) and the strength of the bleach we purchased (5.6) but when it came to entering the bleach amount with gallons in parenthesis I was a bit confused as well as the ppm needed, so we went by the test kit we have and figured ppm at 8. We had a gallon of bleach so that is what I entered in that blank box and it gave me an amount of bleach to add as 1 cup 2 oz. and using the borax calculator it gave me an amount of 1.5 oz. This is what we added to our pool, then tested it and got a very very high reading of chlorine and ph!
After doing a little research about it on the web, I found the suggestions to now add Muriatic Acid to bring the ph down and stablize the pool. Of course my husband is going to purchase the acid, but we have no idea how to use it or how much is needed. Sorry I am such a "novice" in this area, we have never owned a pool of this type for our grandkids before! I'm starting to think maybe we should have just stayed with the "old hard plastic types" we used to get EVERY summer!!