+ Reply to Thread
Results 1 to 7 of 7

Thread: Does anyone here have a 54 inch high pool?

  1. #1
    Join Date
    Jul 2006
    Posts
    7

    Default Does anyone here have a 54 inch high pool?

    I have found one or two, the tahitian being one. It has a unibead liner. the problem is I cant find any above ground pool liners that are 54 inches. Anyone know of any pools that are 54 inch high?

  2. #2
    Join Date
    Apr 2006
    Location
    Apache Junction, Az
    Age
    69
    Posts
    475

    Default Re: Does anyone here have a 54 inch high pool?

    Hi, I see these once in a while but have not paid attention to brands. A properly stretched 52" overlap liner should easily fit a 54" pool. It should be installed in direct sun and be tucked under the rail at the correct time with regard to water level. When the 52" pools first came out we did a lot of replacements with 48" liners. Now that most liners are 48" to 52" they should easily fot a 54" pool. Overlap liners tend to have a lot of excess hanging over the wall.

    Best of luck, Dennis
    AG pool installer
    Arizona

  3. #3
    Join Date
    Apr 2006
    Location
    NW New Jersey
    Posts
    11

    Default Re: Does anyone here have a 54 inch high pool?

    Hi,
    I just ordered a 54" Tahitian pool.

    Here's a link I found to 54" liners: http://www.cheappoolproducts.com/Uni...2~product.html
    Best Regards,
    Jim

  4. #4
    Join Date
    May 2006
    Location
    Kansas
    Posts
    139

    Default Re: Does anyone here have a 54 inch high pool?

    check out this pool:
    It is a Wilbar pool which is the parent or sister company of Sharkline.
    http://www.sunenterprises.com/platinumpools.htm

    Awesome pool.
    Awesome company.
    Awesome customer service. Actually THE BEST customer service I have found. You can even call them on Sunday and talk to a real person. Ask for Lianna Lawson. She is a fossil at the company and knows her stuff. No I don't work for the company.
    In my mind this was the best pool on the net that I could find.

    We almost bought this pool. But my DH hubby switched gears and decided we should go w/ an inground kit. Come to find out they are really not thaaaat expensive when you buy online.

    The Tahitian is great too.
    Also I think the Sharkline Oceanic is 54" tall.

    ~Hoffmans

  5. #5
    NWMNMom is offline Registered+ Widget Weaver NWMNMom 0
    Join Date
    Nov 2004
    Location
    WAAAY NW Minnesota
    Posts
    461

    Default Re: Does anyone here have a 54 inch high pool?

    Love our Wilbar (Seaspray) pool. Ours is 52" but they come in 54
    Beats driving to the lake!
    18'x33'x52" AG oval, hard plumbed system, 22" Pentair Meteor Filter 1.5hp pump, Goldline SWCG System, 2/4x20 SolarBear Panels, Biltmore Steps - 16x14' composite deck, Pool Rover Jr

  6. #6
    Join Date
    Jul 2006
    Posts
    3

    Default Re: Does anyone here have a 54 inch high pool?

    The Artesian Sandy Point Ultra has a 54" wall. The Artesian Echo Caynon has a 54" wall, both these pools have massive frame supports. The Sharkline Oceanic has a 54" wall also. The Sharkline Oceanic is a very nice pool (almost bought one). But the artesian line was hard to beat, much beafer frame and supports. Also what I thought was important was the stainless steel panel for the skimmer and return. My neighbor had a sharkline for about 5 yrs and it started leaking / rusting at the skimmer. That is why I choose Artesin Sandy Point Ultra.

  7. #7
    Join Date
    Jul 2006
    Location
    Shepherdsville, KY
    Posts
    48

    Default Re: Does anyone here have a 54 inch high pool?

    I just realized that my pool is 54" tall. It is a ASAHI Kingston 33'x54" with Outlook Prism J-Hook liner.

+ Reply to Thread

Similar Threads

  1. Old 18 inch round pool skimmer on 1950s in ground pool
    By JaxFL in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 07-08-2012, 10:47 AM
  2. Intex 12 ft by 30 inch pool
    By TiffanyMcEwan in forum Pool Chemistry for Intex-type Pools
    Replies: 3
    Last Post: 06-28-2012, 10:19 PM
  3. Small 1 inch rip in bottom of pool HELP
    By VickiP in forum In-Ground Pool Construction and Repair
    Replies: 5
    Last Post: 07-13-2011, 08:30 PM
  4. AG Mat for Pool Steps - Will a 1 inch rubber mat work?
    By brianbo in forum Above-Ground Pool Construction & Repair
    Replies: 0
    Last Post: 06-09-2008, 10:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts