Take a look at this chart.
Ben's 'best guess' FC/Stabilizer table for algae free operation of OUTDOOR pools -- as of July 2003 --
Use the info in this chart to help you figure out what levels of chlorine you need to maintain in your pool based on the amount of CYA (cyanuric acid, also called stabilizer) that you have in your pool. (FC = free chlorine)
Stabilizer . . . . . . Min. FC . . . . Max FC . . . 'Shock' FC
=> 0 ppm . . . . . . . 1 ppm . . . . . 3 ppm . . . . 10 ppm
=> 10 - 20 ppm . . . . 2 ppm . . . . . 5 ppm . . . . 12 ppm
=> 30 - 50 ppm . . . . 3 ppm . . . . . 6 ppm . . . . 15 ppm
=> 60 - 90 ppm . . . . 5 ppm . . . . . 10 ppm . . .. 20 ppm
=> 100 - 200 ppm . . . 8 ppm . . . . . 15 ppm . . .. 25 ppm
With a cya of 90, you aren't shocking the pool when you raise the cl to 12.
And, as far I know, there isn't a solid form of non-stabilized chlorine.
Also, you're going to need to bring that ph down. Use some muriatic acid - add a pint at a time slowly in front of the return jet. Aim for 7.4-7.6, although anywhere 7.2-7.8 is OK.

Reply With Quote
Well, I guess we're even....I didn't answer your question about Non-CYA tabs and you didn't answer mine about how often you shock.
Bookmarks