Does anyone think this might method help to remove ferric oxide/rust from the pool walls. Please see method at this site;
http://www.chip.com/buick/techtips/rustremoval.html
Or am I crazy!
Aloha,
Paul
Does anyone think this might method help to remove ferric oxide/rust from the pool walls. Please see method at this site;
http://www.chip.com/buick/techtips/rustremoval.html
Or am I crazy!
Aloha,
Paul
Electrolysis only works if the material you are removing the rust from is conductive (i.e. a metal). So it could work for metal pools.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
I read something about staining on fiberglass pools, I copied the Paragraph:
"Fiberglass has a negative electrical charge and can attract positively charged metallic ions, causing the development of a stain. The periodic addition of a metal treatment should help negate this effect and help keep pool stain free. "
It would explain why fiberglass pools stain more easily than other pools, and why I can't figure out where the stains in my pool come from. I will try to find out more about this too --and if anyone else knows anything please help!
Northeast PA
16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5
Bookmarks