If you do not have a SWG or heater, it should not be a problem. If you do, then go by the manufactures recommendations to maintain warranties.
Should I be concerned with a CH of 100 in a fiberglass pool?
FC 3
Ph 7.4
TA 120
CYA 40
TDS 500
water is perfectly clear although I have some brown stains only on rough surface of steps. I use metal free on a weekly basis along with pool perfect
If you do not have a SWG or heater, it should not be a problem. If you do, then go by the manufactures recommendations to maintain warranties.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Thank you for the help
Bookmarks