+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Test results

  1. #1
    kathgilliam is offline ** No working email address ** kathgilliam 0
    Join Date
    Dec 1969
    Location
    Jersey Village, Texas
    Posts
    34

    Default Test results

    Here are my first clear water test results: (Leslie's did them.)

    FC: 0

    TAC: 0

    pH: 7.6

    TA: 90

    Calcium Hardness: 200-400

    CYA: 80

    Salt--she didn't test, but my generator says 2600 and is not asking for more. It is set at 80%. I think it's still dissolving and generating from salt addition last night.


    I have buttloads of bleach in my car, but I've suddenly gone squeamish after being barraged with incredulity from various pool company personnel (one and all) upon hearing I have put Clorox in my pool!!!!!!!!! I mean, they have seriously demeaned me. But it's probably time to put in more bleach, huh?

    One lady told me I was probably blowing holes through my DE filter grids with the bleach. Turns out the filtering problem is a bad gasket, and the whole shebang is covered under our home owners' warranty, all fixed tomorrow. But even before they get here, my water is now clear and we're on the road to recovery, FINALLY.

    You guys are sure....Bleach, right?

    Kath

  2. #2
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: Test results

    Tell them you are using sodium hypochlorite (liquid chlorine). It is exactly the same thing. Liquid chlorine from the pool store comes in 12.5%, 10% and 6% strength. Bleach comes in 6% (ultra bleach...note that this is EXACTLY the same as some of the pool store liquid chlorine, usually for much less money) and 5.25% (regular bleach). All of these are sodium hypochlorite! The only differeces between them is how much you need to add to get a given chlorine level in your pool and the fact that the more concentrated ones will lose strength much faster than the weaker ones! (12.5% sodium hypochlorinte is going to be around 8% two weeks later....a jug of 6% should be good for several months!)
    Retired pool store and commercial pool maintenance guy.

  3. #3
    kathgilliam is offline ** No working email address ** kathgilliam 0
    Join Date
    Dec 1969
    Location
    Jersey Village, Texas
    Posts
    34

    Default Re: Test results

    And when they say you are putting enormous amounts of metal in the pool with bleach??? How would you respond to that?

    K

  4. #4
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: Test results

    I would RUN and not walk away from that person since they do NOT know what they are talking about! Bleach does not put metals in your pool....Ionizers, Nature 2, copper based algaecides, and some fill water do!
    Tell them they need to brush up on their pool chemistry and learn some facts!
    Your salt water generator is manufacturing sodium hypochlorite in the salt cell.....BLEACH!
    Last edited by waterbear; 07-28-2006 at 02:10 PM.
    Retired pool store and commercial pool maintenance guy.

  5. #5
    kathgilliam is offline ** No working email address ** kathgilliam 0
    Join Date
    Dec 1969
    Location
    Jersey Village, Texas
    Posts
    34

    Default Re: Test results

    Many thanks, I am armed with replies now! And I'm on my way to perfect pool water, thanks to all of you!

    My family is scheduled to take a "Pool School" next week so we can better understand the plumbing and how the filter, pump and booster pump all work. Plus, our equipment needs some work, and we will get that tomorrow. Thanks to everyone for helping me!!!

    K

  6. #6
    KurtV is offline Registered+ Widget Weaver KurtV 0
    Join Date
    Dec 2004
    Location
    Mandeville, LA, USA.
    Posts
    418

    Default Re: Test results

    Quote Originally Posted by waterbear
    I would RUN and not walk away from that person since they do NOT know what they are talking about! Bleach does not put metals in your pool....Ionizers, Nature 2, copper based algaecides, and some fill water do!
    Tell them they need to brush up on their pool chemistry and learn some facts!
    Your salt water generator is manufacturing sodium hypochlorite in the salt cell.....BLEACH!
    Except for the sodium.

  7. #7
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: Test results

    Quote Originally Posted by KurtV
    Except for the sodium.
    The sodium comes from the addtion of salt. If you want to get technical the cell is manufacturing chlorine gas which then forms hypoclorous acid and hypochorite ions. There are already sodium ions in the water. In effect the pool water is a very dilute sodium hypochorite solution no matter what form of chlorine is added if there are sodium ions in the water. (a bit oversimplified)

    Let's not confuse a newbie with semantics!
    Last edited by waterbear; 07-28-2006 at 03:06 PM.
    Retired pool store and commercial pool maintenance guy.

  8. #8
    KurtV is offline Registered+ Widget Weaver KurtV 0
    Join Date
    Dec 2004
    Location
    Mandeville, LA, USA.
    Posts
    418

    Default Re: Test results

    Evan,
    Just a joke. I don't want to get technical (and certainly not with you, that wouldn't be a fair fight).
    Last edited by KurtV; 07-29-2006 at 09:35 PM.

  9. #9
    PatL34 is offline Lifetime Member Widget Weaver PatL34 2 stars PatL34 2 stars
    Join Date
    Dec 1969
    Location
    Saint Cloud, FL
    Age
    87
    Posts
    331

    Default Re: Test results

    K

    I tried to explain what happens in a SWCG in the post below, and Waterbear gave you a pretty good picture. I wrote it for the newbies with SWCGs. Been running one since April 1998.

    http://www.poolforum.com/pf2/showthread.php?t=1226

    Hope this helps.

    Pat
    20,000 Gallon IG Diamond Brite pool, 1.5 HP Sta-Rite pump, Hayward Microclear DE3600 filter, Favco solar panels, Poolpilot DIG-220 with SC-48 cell.

    + SWCG OPERATION thread here: http://www.poolforum.com/pf2/showthread.php?t=1226
    + SWCG Running Costs post here: http://www.poolforum.com/pf2/showthread.php?t=316
    + Effective Stabilizer addition post here: http://www.poolforum.com/pf2/showthread.php?p=6645

  10. #10
    west1745 is offline Registered+ Thread Analyst west1745 0
    Join Date
    Dec 2005
    Location
    .
    Posts
    55

    Default Re: Test results

    I have added liquid bleach from Walmart on a few occasions - and it works great!! So yes - trust us!!

    The worst thing to add in my humble opinion, is that crazy dry stuff for shocking that contains stabilizer. Because it is easy to get too much stabilizer in the pool - this happened to me and I had to do a partial drain and refill.

    Now that I have Ben's Kit and the Taylor drop salt test, I am never setting foot in another pool store. Home Depot and Walmart have everything I need. And of course with this forum I have confidence, too!!

+ Reply to Thread

Similar Threads

  1. Test results vary between meter and drop test - not sure what to do?
    By west1745 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 14
    Last Post: 07-29-2006, 03:27 PM
  2. First 234s test results and warning about pool stores' results
    By SoCalBoo in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-16-2006, 01:48 PM
  3. First test results
    By poolbee in forum DPD-FAS based testing
    Replies: 5
    Last Post: 06-15-2006, 10:27 PM
  4. First Test Results
    By Cutter in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-14-2006, 07:30 PM
  5. first test results
    By jazzbone in forum DPD-FAS based testing
    Replies: 2
    Last Post: 05-26-2006, 03:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts