+ Reply to Thread
Results 1 to 4 of 4

Thread: PH low after adding my cya- how to adjust?

Hybrid View

  1. #1
    Join Date
    Jul 2006
    Posts
    8

    Default Re: PH low after adding my cya- how to adjust?

    Thanks Pat- So how much Borax do you add if you can't use the bleach calc to figure it out? 18000 gal to raise .4 to .6?

  2. #2
    duraleigh Guest

    Default Re: PH low after adding my cya- how to adjust?

    Hi, Linda,

    Borax comes in the same size box country wide. So, a good start would be to add 1/2 of the box, wait around 24 hours and retest. Re-add based on your test results.

    The Wal-mart kit ($15) is a good stop-gap kit...much better than the strips. The Taylor kit is a good kit but way too much money ($60 or more, I think) if you've ordered Ben's. His will be worth the wait.

    CYA would not have lowered your pH that much. I suspect it's the inaccuracy of the strips.

    The kitty liter scoop is a nice tip,,,,makes sense.

+ Reply to Thread

Similar Threads

  1. How to adjust CYA down
    By l8nite4me in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-13-2007, 03:27 PM
  2. How to Adjust pH and TA
    By iwannapool in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 05-15-2007, 04:22 PM
  3. What should I adjust ?
    By aswetich in forum DPD-FAS based testing
    Replies: 6
    Last Post: 07-27-2006, 06:33 PM
  4. Adding Stabilizer to adjust CYA
    By waltham41 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 06-08-2006, 01:52 PM
  5. Should I adjust anything ?
    By aswetich in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 05-02-2006, 08:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts