I just added 50 ppm to my pool a few weeks ago but I have not had a change in acid usage yet. I have four strikes against me when it comes to PH drift:
1) Plaster pool
2) SWG
3) High PH fill water > 8
4) High TA fill water > 220 ppm
I am not sure if the Borates are going to help my situation much but it is probably too soon to tell. I still have to get my TA down since it sits at about 110 ppm. After I do that I will report back if I see any changes.
EDIT: I actually have 4 issues
Bookmarks