+ Reply to Thread
Results 1 to 10 of 19

Thread: I hate mustard algae

Hybrid View

  1. #1
    topless is offline Registered+ Thread Analyst topless 0
    Join Date
    Jul 2006
    Location
    Wichita, KS
    Posts
    69

    Default Re: I hate mustard algae

    Quote Originally Posted by DavidD
    I know this is going to sound like "The same ole poolforum standard answer" but If I were you, I'd add more bleach. Now that you have Ben's test kit, you will be able to accurately monitor your FC levels. Bring your FC up to shock level and HOLD it there for a couple of days. I would think this should help. Have you ever put anything with copper in your pool? The reason I ask is that staining may occur if you have so shocking may not be the answer in this case.

    Dave

    P.S.- On another note, I won't use anyone BUT Fed Ex. They are a little more expensive, but when you've got to have it there on time......
    I canceled my Fedex account because of over-billing and lousy service. Best example: Overnight a package to a customer in California (I'm in Kansas) after 2 days it had made it to Oklahoma City. I haven't shipped anything by them for over 2 years and I got a bill from them last week, when I called they didn't know why. Then this feeble attempt at a delivery. If my son hadn't noticed the tag, I'd still be looking for the kit.

    I used some copper based algae killer just before I found this forum. I do have some discoloration from that, but I expect the bleach to take care of it over time. I kept the FC high for over a week, although without a good test kit, I'm not sure exactly how high. The foam thing is so odd. It only happens the way I describe it: clear, run Polaris, foam. By the time it goes away, I need to run the Polaris again.

  2. #2
    Join Date
    Dec 1969
    Posts
    216

    Default Re: I hate mustard algae

    Sounds like MY experiences with DHL and UPS. To each his own I guess.
    If you used copper algaecide "pre forum educated", then you still have copper in the water. I saw where you recently did a partial drain so hopefully the level is negligible. You might think about getting your water tested for copper just to be on the safe side.

    Here's my theory on the foam, as I previously stated, I think it is leftover by products in the water. When you "shut the pump off and switch the valve back to the side jets" the combination of the pressure and air mixing with the water and "stuff" creates the foam. Do as I suggested in my previous post and let's see what, if anything changes. Try to bring your FC up to shock level before using the Polaris again.

    Dave

  3. #3
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    66
    Posts
    2,226

    Default Re: I hate mustard algae

    topless,

    Would you mind letting me know exactly what your chlorine level was (if you know it) when you saw the algae go away? Was your CYA still at 150 or did you drain and refill some of your pool water before the algae went away? I'm trying to determine what level of chlorine is truly needed to get rid of algae and a very high CYA case such as yours is a good one to help make that assessment.

    Ben's table says to shock with 25 ppm of chlorine so I'm wondering if that's the level you believe you attained. Even if you didn't measure the result, you probably calculated how much chlorine to add to get to a certain level so was it 25 ppm that you were shooting for?

    Thanks,
    Richard

  4. #4
    topless is offline Registered+ Thread Analyst topless 0
    Join Date
    Jul 2006
    Location
    Wichita, KS
    Posts
    69

    Default Re: I hate mustard algae

    Well, it turns out that the package wasn't my test kit. It was a package from customer of mine.

    chem geek, I have no idea what my free chlorine level was. The local pool stores just told me it was over 10ppm after 2 gallons of bleach and after I added 6 more gallons of bleach over a 4 day period, it was too high for them to test.
    Last edited by topless; 08-11-2006 at 10:00 AM.

  5. #5
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    66
    Posts
    2,226

    Default Re: I hate mustard algae

    OK thanks. When you get your own test kit, assuming it's a FAS-DPD test like the one Ben provides, then you will be able to test even high chlorine levels. Just so you know, even the pool store would be able to determine your high chlorine levels if you give them diluted samples of your water, say diluted 4:1 using distilled water which means 1 part pool water plus 3 parts distilled water (tap water would probably also be OK since you would be checking only for extraordinarly high chlorine levels, but tap water will likely either have some low levels of chlorine in it or slightly higher levels of monochloramine which reports as Combined Chlorine, but still wouldn't be more than a few ppm). You would then multiply whatever reading they give you by 4. This isn't super accurate, but is still better than nothing.

  6. #6
    topless is offline Registered+ Thread Analyst topless 0
    Join Date
    Jul 2006
    Location
    Wichita, KS
    Posts
    69

    Default Re: I hate mustard algae

    I hadn't thought of that. If the rain stays away, I'll take a sample in this weekend.

+ Reply to Thread

Similar Threads

  1. Mustard Algae
    By AndreaA in forum Dealing with Algae & Slime
    Replies: 26
    Last Post: 06-11-2011, 11:18 AM
  2. Wanted: Mustard algae or suspected mustard algae
    By gonefishin in forum Dealing with Algae & Slime
    Replies: 28
    Last Post: 08-30-2007, 08:40 PM
  3. Green algae? Mustard algae?
    By AE340B in forum Dealing with Algae & Slime
    Replies: 6
    Last Post: 07-15-2007, 08:32 PM
  4. Mustard Algae???
    By Jaybird70 in forum Dealing with Algae & Slime
    Replies: 9
    Last Post: 11-03-2006, 10:20 PM
  5. Mustard Algae-PLEASE HELP!!!!
    By CUTURHAIR in forum Dealing with Algae & Slime
    Replies: 3
    Last Post: 06-01-2006, 07:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts