It's now been 2 weeks since I ordered (and paid for) the 234 test kit. I still don't have it so I can't get some of my readings.
Last test I did:
FCL - 4 ppm
TCL - 4 ppm
ph - 7.2

The algae is gone completely, however I still have something strange happening. The pool is crystal clear, but debris on the bottom, circulating the side jets. I run the Polaris, it stays clear, debris is picked up. When I shut the pump off and switch the valve back to the side jets, it spews out white stuff that ends up as foam on the top of the water. I've backflushed and rinsed several hundred gallons (6"-8" of water level) and it still is foaming. It takes about 24 hours to dissipate. I haven't put anything but water in the pool for 2 weeks and before that only bleach. I can't figure out why it's doing this. It has done this 3-4 times in the last 2 weeks.