+ Reply to Thread
Results 1 to 9 of 9

Thread: Rain caused cloudy water

Hybrid View

  1. #1
    Join Date
    May 2006
    Location
    Sanford, FL
    Posts
    387

    Default Re: Rain caused cloudy water

    If the water turns yellow (iron) or green (copper) - then I would be inclined to think it was a metals problem - but since it is cloudy and you have not added any additional sources of metals - I would not think it was metals

    Now - you have NO chlorine - that WILL cause cloudy water. If you have successfully treated waters in your pool and have gotten rid of the stains - you can add more sequesterant if you want - it won't hurt to add a little extra - you really need to increase your chlorine.

    You should keep a residual of 3-5ppm and shock at 15ppm. Wait for additional posts to see how long you wait between metal treatments and shocking. DO NOT add a clarifier - they are usually not needed and can cause additional problems.
    Completed 8/21/06
    14,000 gallon 3'-6' concrete pool with Diamond Brite
    Spa with spillway
    250K BTU gas heater (for spa)
    SWCG - Aqua Rite
    Hayward Super II Pump - Cartridge filter

    See pictures here http://www.philsimmons.com/family/ga...mages&keyword=

  2. #2
    Join Date
    Jul 2006
    Posts
    12

    Default Re: Rain caused cloudy water

    I put in a few more ounces of sequestor for good measure and I started adding chlorine at about 16-20 ounces every two hours after testing. I'll try that throughout today and see if it starts clearing up.

    Continuing to add Borax at 1/2 box at a time to get the PH back up.

  3. #3
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Rain caused cloudy water

    You will probably find it hard to keep your chlorine up - just keep checking and add it as it goes down - get it up to the level for your cya - don't get it to shock, just keep it at a ppm a little higher everyday, keep the ph at 7.2 not higher. As you add the chlorine keep checking to see if the stains come back - if you see a stain start to form, make sure your ph is not higher than 7.2 and add more sequestereing agent, then keep slowly taking the chlorine up.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  4. #4
    Join Date
    Jul 2006
    Posts
    12

    Default Re: Rain caused cloudy water

    The PH is at 7.0 right now and I was going to hold it there until the water got clearer so I can observe any stain re-developing.

    I'm telecommuting today and tommorrow so I'm able to check the chlorine every two hours. It's at .5 right now and I add about 20 oz every two hours, will continue with this until the reading gets to 5 or the water clears, whichever comes first. The water is a tad clearer than last nite but not by much.

    Does anyone know why the rain clouded the water?

  5. #5
    Join Date
    Jul 2006
    Posts
    12

    Default Re: Rain caused cloudy water

    No improvement to water clarity this morning. Tested first thing and found FC = 1 CC = 6. Added a pound of Borax last nite and the PH is a tad below 7.2 so I'll guess it's at 7.1.

    The question I have concerns not shocking the pool after the stain treatment.

    Should I even be concerned about TC and CC at this point? Ignore those readings and just consider FC as a basis for shock levels and shoot for a FC level of 5?

  6. #6
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Rain caused cloudy water

    No, I wouldn't be concerned yet - the reason your water is cloudy is that it is getting rid of the results of the stain treatment - that is why it is hard to keep your chlorine in the water. Just make sure you keep chlorine in the water, and leave your ph where it is. This will help keep stains from coming back as you raise your chlorine levels. Continue to raise your chlorine level slowly, this way you can see if any stain is starting to come back - if it does, add a little more sequesterer. If you have a sand or DE filter, you can put a thrichlor puck in the skimmer, which will help to let any metal that is left in the water stain onto the filter instead of the pool. DO NOT do this if you have a cartridge filter. Keep the filter running 24/7, and raise the chlorine only up to 5 for now. Don't shock for at least a week. You are not fighting algae, you are fighting the stuff that's left from the stain treatment.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  7. #7
    Join Date
    Jul 2006
    Posts
    12

    Default Re: Rain caused cloudy water

    Maybe the water is cloudy as a result of the stain treatment. The water clouded after adding Super Sequa Sol but it cleared up in 24 hours. At that point I started to slowly raise the PH and was going to begin chlorine at 48 hours after adding the sequester.

    However, it rained about an inch after the water has cleared from the sequester - immediately after the rain I checked the pool out and it has been cloudy since.

    Just tested it again the the FC = 5 and CC = 5 and that was two hours after adding about 30 ounces of chlorine. So, it looks like we're starting to make a little progress. It's pretty hard to tell but I would say the water is very slightly more clear than last nite.

    Can't tell if any re-staining is going on yet - water isn't clear enough.

    Thanks to all, Bob

+ Reply to Thread

Similar Threads

  1. After 2" heavy rain shower pool water is slightly cloudy
    By silvergalore in forum --cleanup--
    Replies: 1
    Last Post: 06-28-2013, 08:29 PM
  2. ground water caused major wrinkle
    By dave24 in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 04-29-2012, 03:42 PM
  3. oops I caused a perfectly clear pool to be cloudy
    By Cords in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 06-06-2011, 09:08 AM
  4. Water under liner after rain
    By Jbonnette in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 04-25-2011, 06:52 AM
  5. cya application? Rain water?
    By newguyjosh in forum Pool Chemicals & Pool Water Problems
    Replies: 3
    Last Post: 06-08-2010, 08:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts