Taking the Plunge does not list the steps out concisely, but rather tells what was done during this conversion, with many comments in between.
Basically, from what I have read, a good summary is this:
1. get your chlorine up to 15ppm using bleach (lots of it!) and keep it there.
2. Test several times a day to ensure you are keeping 15 ppm chlorine levels. Use a drops based test, (Ben's kit, Taylor, or HTH 6-way) and dilute with distilled water if necessary to read the test. Here is CarlD's shot glass method for diluting your sample http://www.poolforum.com/pf2/showthr...?t=4592&page=2
3. Run your filter 24/7 and backwash as needed.
4. When your conversion is complete, change the sand in your filter (if you have a sand filter ... I do not know about cartridge or DE
Your water will go through many shades of green and orange as the Baqua is being consumed by the chlorine.
...Mods or anyone more knowledgeable than I, feel free to amend my brief summary if I did not get it quite right!![]()
Bookmarks