I just did a partial drain and refill to remove excess CYA. And that little venture was successful - we are now at a happy level of 60.

Anyway, about adding the salt. The meter on the Goldline AquaRite Salt Chlorine Generator says that my salt is 3300 ppm.

But the Taylor drop test indicates that the salt is 2600. I took that test this morning with the pump running on low speed (have a 2 speed pump).

Why is there such a difference in test results? And which one do you think is right?

Maybe I should wait until tonight when the pump is running on full speed to do another drop test?

The salt was added 2 days ago and has dissollved completely.