Too Big Of Filter???

[cwstnsko]

I don't believe there is such a thing as too big a filter. the pump on the other hand might be too much for your skimmer and returns. I'm not real familiar with AG pools, others will chime in with more useful insights.

[Rangeball]

I think it's only a problem when the pump is too big for the filter. If they are matched, at worst you will probably just turn over your pool very fast, which isn't a bad thing, you get to run the pump for shorter times.

As long as you can get fittings to match up to your pool, I would use it.

What a great buy

[sevver]

I would also go for it, why would you regret a faster turnover? The pool store probably just wants you to toss it and buy a new pool from them, with a new pump and filter that is specifically matched to the pool. You got a bargain I would say and for what it would cost to give it a go it would be worth a shot.

[CarlD]

Which Intex? Hard frame or EasySet Donut?

The biggest problems I see are:
First, as mentioned, if the filter is too small for the pump (or the pump is too big for the filter--same thing). In that case you may be able to get a reduced-flow impeller for the pump, which would be the cheapest solution--You got a BIG margin on a $5 pump&filter!

The second problem is that most filters are 1.5" plumbed, and most Intex pools are 1.25" fitted--and you cannot increase the size. This mean that you'll need to step-down in fittings to 1.25" at some point, which will increase pressure and may damage the pool at that point. ANOTHER good reason for the reduced-flow impeller...

But once you have that solved, hook up a solar panel and you'll have a HUGE hot tub, complete with jet!