+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 22

Thread: How do you add muriatic acid?

  1. #11
    mohawk is offline Registered+ Thread Analyst mohawk 0
    Join Date
    May 2006
    Location
    Minneapolis, MN
    Posts
    108

    Default Re: How do you add muriatic acid?

    Newpoo, that's funny-Neil Armstrong. I was wearing shorts when I poured the acid in-maybe it'll be long pants from now on. Denise

  2. #12
    Join Date
    Dec 1969
    Location
    .warren, michigan
    Age
    67
    Posts
    15

    Smile Re: How do you add muriatic acid?

    I always pour the acid into a old glass canning jar. They have measurements on the side of them and are easy to handle.

  3. #13
    Tredge is offline Registered+ Thread Analyst Tredge 0
    Join Date
    Apr 2006
    Location
    Wisconsin
    Posts
    122

    Default Re: How do you add muriatic acid?

    I had posted the same question about a month ago....I was loosing my shorts and shirts from splashed acid that I didnt notice.

    The recommendation was to dilute it in a bucket first then toss the bucket in the deep end.

    Since then, no new holes in my shirts! I dilute roughly 5/1 water/acid
    Some people have hobbies.....I have a pool.

  4. #14
    Join Date
    Jun 2006
    Location
    Sun Prairie, WI
    Age
    56
    Posts
    74

    Default Re: How do you add muriatic acid?

    I pour it out of the jug slowly at the waterline in front of a return. I wear gloves, goggles, and a respirator (indoor pool).
    ~Dr. Spike

    Pool: IG vinyl, heated, fully enclosed (dome)
    Shape: Grecian (rectangular)
    Size: 20'W x 40'L
    Depth: 4' / 8'
    Filter: Sand w/DE added
    Other: 6' Diving Board
    Maintenance: BBB! Ben's PS234 kit! Manual vacuum, brush, and Pool Buster Max CG Gold

  5. #15
    simsjim is offline Registered+ Thread Analyst simsjim 0
    Join Date
    Jul 2006
    Posts
    55

    Default Re: How do you add muriatic acid?

    Couldn't you substitute granular Sodium Bisulfate to low PH? Is there a benefit to the Acid that the Sodium Bisulfate wont provide?

  6. #16
    mohawk is offline Registered+ Thread Analyst mohawk 0
    Join Date
    May 2006
    Location
    Minneapolis, MN
    Posts
    108

    Default Re: How do you add muriatic acid?

    I believe muriatic acid is cheaper and doesn't add sulfates to your pool. I was given certain chemicals when we purchased our pool and sodium bisulfate was one of them. I used 2 3lb containers in the pool and it only brought down the ph by 2 points. When I first used the muriatic acid, I poured approx. 3/4 c into the pool and it came down by 2 points. I still have a lot left in the gallon jug as compared to no more dry acid. Hope this helps. Denise

  7. #17
    PatL34 is offline Lifetime Member Widget Weaver PatL34 2 stars PatL34 2 stars
    Join Date
    Dec 1969
    Location
    Saint Cloud, FL
    Age
    88
    Posts
    331

    Default Re: How do you add muriatic acid?

    If you have a SWCG, then Muriatic Acid is the only pH reducer you should be using. As Mohawk says, sodium bisulfate only increases you total TDS.

    Pat
    20,000 Gallon IG Diamond Brite pool, 1.5 HP Sta-Rite pump, Hayward Microclear DE3600 filter, Favco solar panels, Poolpilot DIG-220 with SC-48 cell.

    + SWCG OPERATION thread here: http://www.poolforum.com/pf2/showthread.php?t=1226
    + SWCG Running Costs post here: http://www.poolforum.com/pf2/showthread.php?t=316
    + Effective Stabilizer addition post here: http://www.poolforum.com/pf2/showthread.php?p=6645

  8. #18
    joelq is offline Registered+ Thread Analyst joelq 0
    Join Date
    May 2006
    Location
    Frisco, TX
    Posts
    69

    Default Re: How do you add muriatic acid?

    I'll be adding my first dose of Muriatic Acid tonight (pool just filled this past Saturday). I like the idea of measuring how much to add with a glass measuring cup. Do I rinse the cup after I pour the acid in? I would think not given the "never add water to acid" warning. Do I just leave the cup to dry?

  9. #19
    Join Date
    Dec 2004
    Location
    IL.
    Posts
    345

    Default Re: How do you add muriatic acid?

    I use a plastic measuring cup, and when I've poured all the acid in, I dip it in the pool and pour it out 4 times, making sure to get it totally rinsed, then set it aside to air dry in the garage with my other pool tools.

  10. #20
    Join Date
    Jun 2006
    Location
    Central Texas
    Posts
    217

    Default Re: How do you add muriatic acid?

    Yeah, just quickly dip the measuring cup into the pool water and empty a few times. No violent reactions here so far.
    Tom Wood
    15K IG Plaster, Sand Filter, Polaris 180

+ Reply to Thread

Similar Threads

  1. Lowering TA with Dry Acid Or Muriatic Acid
    By CelticDaddio in forum Dealing with Alkalinity and Calcium
    Replies: 30
    Last Post: 07-05-2007, 12:54 AM
  2. How much Muriatic Acid?
    By mccato in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 08-29-2006, 08:21 AM
  3. How to add muriatic acid
    By BullDean in forum Pool Chemicals & Pool Water Problems
    Replies: 5
    Last Post: 06-12-2006, 10:51 PM
  4. how much muriatic acid
    By wolfcue in forum Dealing with Alkalinity and Calcium
    Replies: 10
    Last Post: 06-07-2006, 05:55 PM
  5. How much muriatic acid to add?
    By Blemished_Chemist in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 06-04-2006, 08:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts