+ Reply to Thread
Results 1 to 10 of 22

Thread: How do you add muriatic acid?

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    12

    Default Re: How do you add muriatic acid?

    When I first started using M. Acid it was if I were going into space. I had so much protection on I had a difficult time moving. It took me 30 minutes to add one cup of the stuff. As time went by I began to wear less and less stuff. So one day after church I remembered that I needed to add a cup (you guys no were I'm going with this) So instead of changing first I went out grabbbed the jug and started pouring in the deep end. Replaced the cap and went inside, seconds later my wife screamed at me was I alright , I looked at her and asked what she was talking about. She pointed to my pants and all I could do was stand there in amazement. Without my knowing the acid had splashed up my pant legs and totally ruined my slacks. Let's just say my new nickname is Neil Armstrong.

  2. #2
    mohawk is offline Registered+ Thread Analyst mohawk 0
    Join Date
    May 2006
    Location
    Minneapolis, MN
    Posts
    108

    Default Re: How do you add muriatic acid?

    Newpoo, that's funny-Neil Armstrong. I was wearing shorts when I poured the acid in-maybe it'll be long pants from now on. Denise

  3. #3
    Join Date
    Dec 1969
    Location
    .warren, michigan
    Age
    67
    Posts
    15

    Smile Re: How do you add muriatic acid?

    I always pour the acid into a old glass canning jar. They have measurements on the side of them and are easy to handle.

  4. #4
    Tredge is offline Registered+ Thread Analyst Tredge 0
    Join Date
    Apr 2006
    Location
    Wisconsin
    Posts
    122

    Default Re: How do you add muriatic acid?

    I had posted the same question about a month ago....I was loosing my shorts and shirts from splashed acid that I didnt notice.

    The recommendation was to dilute it in a bucket first then toss the bucket in the deep end.

    Since then, no new holes in my shirts! I dilute roughly 5/1 water/acid
    Some people have hobbies.....I have a pool.

  5. #5
    Join Date
    Jun 2006
    Location
    Sun Prairie, WI
    Age
    56
    Posts
    74

    Default Re: How do you add muriatic acid?

    I pour it out of the jug slowly at the waterline in front of a return. I wear gloves, goggles, and a respirator (indoor pool).
    ~Dr. Spike

    Pool: IG vinyl, heated, fully enclosed (dome)
    Shape: Grecian (rectangular)
    Size: 20'W x 40'L
    Depth: 4' / 8'
    Filter: Sand w/DE added
    Other: 6' Diving Board
    Maintenance: BBB! Ben's PS234 kit! Manual vacuum, brush, and Pool Buster Max CG Gold

  6. #6
    simsjim is offline Registered+ Thread Analyst simsjim 0
    Join Date
    Jul 2006
    Posts
    55

    Default Re: How do you add muriatic acid?

    Couldn't you substitute granular Sodium Bisulfate to low PH? Is there a benefit to the Acid that the Sodium Bisulfate wont provide?

  7. #7
    mohawk is offline Registered+ Thread Analyst mohawk 0
    Join Date
    May 2006
    Location
    Minneapolis, MN
    Posts
    108

    Default Re: How do you add muriatic acid?

    I believe muriatic acid is cheaper and doesn't add sulfates to your pool. I was given certain chemicals when we purchased our pool and sodium bisulfate was one of them. I used 2 3lb containers in the pool and it only brought down the ph by 2 points. When I first used the muriatic acid, I poured approx. 3/4 c into the pool and it came down by 2 points. I still have a lot left in the gallon jug as compared to no more dry acid. Hope this helps. Denise

  8. #8
    PatL34 is offline Lifetime Member Widget Weaver PatL34 2 stars PatL34 2 stars
    Join Date
    Dec 1969
    Location
    Saint Cloud, FL
    Age
    88
    Posts
    331

    Default Re: How do you add muriatic acid?

    If you have a SWCG, then Muriatic Acid is the only pH reducer you should be using. As Mohawk says, sodium bisulfate only increases you total TDS.

    Pat
    20,000 Gallon IG Diamond Brite pool, 1.5 HP Sta-Rite pump, Hayward Microclear DE3600 filter, Favco solar panels, Poolpilot DIG-220 with SC-48 cell.

    + SWCG OPERATION thread here: http://www.poolforum.com/pf2/showthread.php?t=1226
    + SWCG Running Costs post here: http://www.poolforum.com/pf2/showthread.php?t=316
    + Effective Stabilizer addition post here: http://www.poolforum.com/pf2/showthread.php?p=6645

+ Reply to Thread

Similar Threads

  1. Lowering TA with Dry Acid Or Muriatic Acid
    By CelticDaddio in forum Dealing with Alkalinity and Calcium
    Replies: 30
    Last Post: 07-05-2007, 01:54 AM
  2. How much Muriatic Acid?
    By mccato in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 08-29-2006, 09:21 AM
  3. How to add muriatic acid
    By BullDean in forum Pool Chemicals & Pool Water Problems
    Replies: 5
    Last Post: 06-12-2006, 11:51 PM
  4. how much muriatic acid
    By wolfcue in forum Dealing with Alkalinity and Calcium
    Replies: 10
    Last Post: 06-07-2006, 06:55 PM
  5. How much muriatic acid to add?
    By Blemished_Chemist in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 06-04-2006, 09:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts