+ Reply to Thread
Results 1 to 2 of 2

Thread: New Pool 1st test results

Hybrid View

  1. #1
    Join Date
    Jul 2006
    Posts
    1

    Default New Pool 1st test results

    We just had a pool installed today and filled. It is an above ground 24' round and 4.5' deep(13,500 gallons) I have been reading the site for a while and decided to try the BBB method. I brought the pool up to shock level tonight to see if it holds overnight.

    Any suggestions or comments are welcomed.

    Test results

    FC 12 ppm
    TC 12 ppm
    TA 200 ppm
    ph 7.8
    Hardness not present
    CYA 0 ppm. I will start adding tommorow to get up around 30-40 ppm

    If I lower my PH will The TA come down also and if so how much? I plan on lowering my ph down to 7.2 -7.4. Will I need to use the aeration method to get my TA down to an acceptable level?

    Thank you
    Matthew

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

+ Reply to Thread

Similar Threads

  1. Test results on my new pool
    By t-cell in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 06-26-2013, 09:27 PM
  2. New pool, first test results
    By iBrew in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 06-29-2011, 06:21 PM
  3. Pool Store vs Test Kit Results??
    By hawkeye91 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 15
    Last Post: 07-16-2010, 09:58 AM
  4. First 234s test results and warning about pool stores' results
    By SoCalBoo in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-16-2006, 01:48 PM
  5. Pool Store Test Results
    By Phulish in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 05-22-2006, 08:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts